Vehicle barriers · CAME partner
Vehicle barriers in Blackwood
smaller town · Wales · population 15,476
Blackwood vehicle entrances need a barrier that fails safe and still lets traffic through. This smaller town is in Caerphilly, Wales (Wales), population 15,476. The workshop in Offerton is about 128 miles away.
Around Blackwood the useful sites are multi-storey decks, supermarket yards, school fronts and factory gates. Nearby listed towns: Bargoed (1.5 miles), Gelligaer (2.1 miles), Abercarn (3.4 miles).
Commercial estates serving Blackwood usually want a boom, a loop and a reader, with a manual release the fire strategy will accept. Also see Bargoed (1.5 miles), Gelligaer (2.1 miles), Abercarn (3.4 miles).
Partner supply is CAME. A replacement lane is a CAME GARD barrier with loops and edges. We still service the other manufacturers listed on this page.
The partner badge on this page is CAME only. Every other logo is a brand we will open, test and either keep or replace after the survey in Caerphilly.
ANPR or a Paxton, Videx or HID reader can request an opening. The barrier still has to decide it is safe to move.
Induction loops, photocells and the boom skirt are part of the quote. If a reader is releasing the lane, that access brand is specified separately from the barrier manufacturer.
Quotes for Blackwood are POA after scope. The phone number is 07517806082. WhatsApp uses the same line.
For Caerphilly we batch surveys when more than one lane is in the same week. Blackwood itself is about 128 miles from SK2.
CAME is the new-lane default in Blackwood; the incumbent is kept only when it is sound. Population on this list is 15,476, which is why the page exists. Safety edges stay in circuit. Spring tension is left alone until the lane is isolated.
Manufacturers for Blackwood
CAME is the partner for new vehicle barriers in Blackwood. Every brand below has a nameplate and a link to its brand page. Use “Specify” to open the wizard with that manufacturer selected. Installation is POA.
CAME GARD 5m barrier packs on the products hub →
Partner for new vehicle barriers. CAME GARD booms, controls, loops and safety edges. Five-metre packs are on the products hub; installation is POA after survey.
Specify CAMEExisting BFT barriers and gate operators. New lanes are normally specified on the CAME partner range unless the survey supports keeping BFT.
Specify BFTFAAC barrier and operator servicing, including safety-device checks. New installs default to CAME unless the incumbent system should stay.
Specify FAACNice barrier and gate automation. We identify the control board on site before quoting spares or a takeover.
Specify NiceBeninca booms and operators. Service and fault work, with CAME specified when a lane is being replaced.
Specify BenincaMagnetic Autocontrol barriers on car parks and staff entrances. We test loops, photocells and the boom before any control change.
Specify Magnetic AutocontrolHormann barriers and related door operators where they control a vehicle lane.
Specify HormannRoger Technology barriers and 24V operators. Useful where a brushless incumbent is still supportable.
Specify Roger TechnologyDitec barriers and automation. Service of the existing lane, or a CAME replacement when the cabinet is no longer viable.
Specify DitecTau barrier and gate gear. We confirm the model on the rating plate rather than guessing from the boom colour.
Specify TauCardin operators on barriers and gates. Radio and loop faults are quoted separately from a full lane replacement.
Specify CardinGibidi barrier motors and controls. Existing plant is serviced; new booms are CAME unless the site standard says otherwise.
Specify GibidiAutomatic Systems lanes used on busier car parks and controlled entrances.
Specify Automatic SystemsCenturion barrier and gate operators. We check torque and safety devices before adjusting force.
Specify CenturionSEA barrier and gate controls. Model and board revision are recorded on the survey sheet.
Specify SEAFadini hydraulics and electromechanical barriers. Oil leaks and valve settings are part of the service, not an afterthought.
Specify FadiniLiftMaster operators where a site already uses them on a vehicle entrance.
Specify LiftMasterGenius barrier and gate operators, including older FAAC-group plant that is still in service.
Specify GeniusFrontier Pitts vehicle barriers and high-security lanes. We service the incumbent and specify CAME where a standard car-park boom is the right replacement.
Specify Frontier PittsPaxton Net2 and related readers releasing a barrier. The barrier manufacturer and the access manufacturer are specified separately.
Specify PaxtonVidex panels and GSM modules used at a barrier or gate. Common on the 5m packs listed with CAME hardware.
Specify VidexHID readers and credentials where a staff barrier must share the building access cards.
Specify HID GlobalComelit video and audio entry when the barrier lane also needs a speech panel.
Specify ComelitSpecification wizard — Blackwood
Embedded on this page. It posts to the contact form with the town, brand and job attached. You can also call 07517806082.
Questions for Blackwood
Can access control release the Blackwood lane?
Yes when the fire strategy allows it. Paxton, Videx, HID, Comelit and BPT are listed separately from the barrier manufacturer.
Will you service a non-CAME barrier in Blackwood?
Yes. The manufacturer grid lists the barrier and access brands this page covers. We identify the cabinet before ordering parts.
What should we send for a Blackwood quote?
Lane count, approximate boom length, a photo of the rating plate and how the barrier opens today (loop, fob, reader or attendant).
Can access control release the Blackwood lane?
Yes when the fire strategy allows it. Paxton, Videx, HID, Comelit and BPT are listed separately from the barrier manufacturer.
Nearby towns
Speak to Icomply about Blackwood
Offerton, Stockport, SK2 5DE. About 128 miles.
Call 07517806082