Vehicle barriers · CAME partner
Vehicle barriers in Dundee
large town · East and Central Scotland · population 148,210
A boom in Dundee is a safety device with a motor attached. large town profile, Dundee City, East and Central Scotland. Headcount on the town file: 148,210. Road miles from the SK2 bench: 214.
Around Dundee the useful sites are multi-storey decks, supermarket yards, school fronts and factory gates. Nearby listed towns: Carnoustie (10.5 miles), Saint Andrews (11.2 miles), Forfar (12.5 miles).
Commercial estates serving Dundee usually want a boom, a loop and a reader, with a manual release the fire strategy will accept. Also see Carnoustie (10.5 miles), Saint Andrews (11.2 miles), Forfar (12.5 miles).
The partner badge on this page is CAME only. Every other logo is a brand we will open, test and either keep or replace after the survey in Dundee City.
Partner supply is CAME. A replacement lane is a CAME GARD barrier with loops and edges. We still service the other manufacturers listed on this page.
Induction loops, photocells and the boom skirt are part of the quote. If a reader is releasing the lane, that access brand is specified separately from the barrier manufacturer.
ANPR or a Paxton, Videx or HID reader can request an opening. The barrier still has to decide it is safe to move.
Call 07517806082 for a Dundee barrier, or use the specification wizard. Say whether the lane is CAME already or another brand.
For Dundee City we batch surveys when more than one lane is in the same week. Dundee itself is about 214 miles from SK2.
CAME is the new-lane default in Dundee; the incumbent is kept only when it is sound. Population on this list is 148,210, which is why the page exists. The partner for a new boom is CAME. Timer close is not extended to hide a slow loop.
Manufacturers for Dundee
CAME is the partner for new vehicle barriers in Dundee. Every brand below has a nameplate and a link to its brand page. Use “Specify” to open the wizard with that manufacturer selected. Installation is POA.
CAME GARD 5m barrier packs on the products hub →
Partner for new vehicle barriers. CAME GARD booms, controls, loops and safety edges. Five-metre packs are on the products hub; installation is POA after survey.
Specify CAME
Existing BFT barriers and gate operators. New lanes are normally specified on the CAME partner range unless the survey supports keeping BFT.
Specify BFT
FAAC barrier and operator servicing, including safety-device checks. New installs default to CAME unless the incumbent system should stay.
Specify FAAC
Nice barrier and gate automation. We identify the control board on site before quoting spares or a takeover.
Specify Nice
Beninca booms and operators. Service and fault work, with CAME specified when a lane is being replaced.
Specify Beninca
Magnetic Autocontrol barriers on car parks and staff entrances. We test loops, photocells and the boom before any control change.
Specify Magnetic Autocontrol
Hormann barriers and related door operators where they control a vehicle lane.
Specify Hormann
Roger Technology barriers and 24V operators. Useful where a brushless incumbent is still supportable.
Specify Roger Technology
Ditec barriers and automation. Service of the existing lane, or a CAME replacement when the cabinet is no longer viable.
Specify Ditec
Tau barrier and gate gear. We confirm the model on the rating plate rather than guessing from the boom colour.
Specify Tau
Cardin operators on barriers and gates. Radio and loop faults are quoted separately from a full lane replacement.
Specify Cardin
Gibidi barrier motors and controls. Existing plant is serviced; new booms are CAME unless the site standard says otherwise.
Specify Gibidi
Automatic Systems lanes used on busier car parks and controlled entrances.
Specify Automatic Systems
Centurion barrier and gate operators. We check torque and safety devices before adjusting force.
Specify Centurion
SEA barrier and gate controls. Model and board revision are recorded on the survey sheet.
Specify SEA
Fadini hydraulics and electromechanical barriers. Oil leaks and valve settings are part of the service, not an afterthought.
Specify Fadini
LiftMaster operators where a site already uses them on a vehicle entrance.
Specify LiftMaster
Genius barrier and gate operators, including older FAAC-group plant that is still in service.
Specify Genius
Frontier Pitts vehicle barriers and high-security lanes. We service the incumbent and specify CAME where a standard car-park boom is the right replacement.
Specify Frontier Pitts
Paxton Net2 and related readers releasing a barrier. The barrier manufacturer and the access manufacturer are specified separately.
Specify Paxton
Videx panels and GSM modules used at a barrier or gate. Common on the 5m packs listed with CAME hardware.
Specify Videx
HID readers and credentials where a staff barrier must share the building access cards.
Specify HID Global
Comelit video and audio entry when the barrier lane also needs a speech panel.
Specify Comelit
Specification wizard — Dundee
Embedded on this page. It posts to the contact form with the town, brand and job attached. You can also call 07517806082.
Questions for Dundee
Do you remove safety devices to make a boom move?
No. Loops, photocells and safety edges stay in the circuit. A barrier that cannot see an obstruction is not signed off.
Who is the barrier partner for Dundee?
CAME. New lanes are specified on CAME GARD unless the survey supports keeping the existing manufacturer. Call 07517806082.
How far is Dundee from your workshop?
About 214 miles from Offerton, Stockport SK2. Attendance is booked around that distance.
Do you remove safety devices to make a boom move?
No. Loops, photocells and safety edges stay in the circuit. A barrier that cannot see an obstruction is not signed off.
Nearby towns
Speak to Icomply about Dundee
Offerton, Stockport, SK2 5DE. About 214 miles.
Call 07517806082