Vehicle barriers · CAME partner
Vehicle barriers in Dursley
smaller town · South West · population 14,992
Dursley (South West) keeps staff, visitors and residents on the same piece of tarmac. We treat that as a surveyed lane. Population 14,992 in Gloucestershire. Mileage from Offerton 119.
Housing schemes near Dursley often share one barrier between residents and a delivery window. Other local pages: Stroud (8.1 miles), Thornbury (8.7 miles), Yate (10.1 miles).
Typical lanes around Dursley are retail car parks, office decks, hospital drop-offs, industrial yards and gated housing. Neighbours on this mainland list include Stroud (8.1 miles), Thornbury (8.7 miles), Yate (10.1 miles).
New Dursley installs name CAME on the quotation. Service visits name whatever rating plate is on the cabinet.
Where Dursley needs a new lane, the default specification is CAME. Taking over an existing BFT, FAAC, Nice or Magnetic cabinet is a different quote and stays on that manufacturer if the hardware is sound.
Induction loops, photocells and the boom skirt are part of the quote. If a reader is releasing the lane, that access brand is specified separately from the barrier manufacturer.
ANPR or a Paxton, Videx or HID reader can request an opening. The barrier still has to decide it is safe to move.
Service contracts for Dursley record the manufacturer, the loop test and the release method. Start with 07517806082.
Reaching Dursley (England) is a planned run of roughly 119 miles. Faults that need a special board are quoted as supply plus a return visit.
CAME is the new-lane default in Dursley; the incumbent is kept only when it is sound. The council area is Gloucestershire. We will not bridge out a loop to force a close. Radio fobs are counted before any delete.
Manufacturers for Dursley
CAME is the partner for new vehicle barriers in Dursley. Every brand below has a nameplate and a link to its brand page. Use “Specify” to open the wizard with that manufacturer selected. Installation is POA.
CAME GARD 5m barrier packs on the products hub →
Partner for new vehicle barriers. CAME GARD booms, controls, loops and safety edges. Five-metre packs are on the products hub; installation is POA after survey.
Specify CAME
Existing BFT barriers and gate operators. New lanes are normally specified on the CAME partner range unless the survey supports keeping BFT.
Specify BFT
FAAC barrier and operator servicing, including safety-device checks. New installs default to CAME unless the incumbent system should stay.
Specify FAAC
Nice barrier and gate automation. We identify the control board on site before quoting spares or a takeover.
Specify Nice
Beninca booms and operators. Service and fault work, with CAME specified when a lane is being replaced.
Specify Beninca
Magnetic Autocontrol barriers on car parks and staff entrances. We test loops, photocells and the boom before any control change.
Specify Magnetic Autocontrol
Hormann barriers and related door operators where they control a vehicle lane.
Specify Hormann
Roger Technology barriers and 24V operators. Useful where a brushless incumbent is still supportable.
Specify Roger Technology
Ditec barriers and automation. Service of the existing lane, or a CAME replacement when the cabinet is no longer viable.
Specify Ditec
Tau barrier and gate gear. We confirm the model on the rating plate rather than guessing from the boom colour.
Specify Tau
Cardin operators on barriers and gates. Radio and loop faults are quoted separately from a full lane replacement.
Specify Cardin
Gibidi barrier motors and controls. Existing plant is serviced; new booms are CAME unless the site standard says otherwise.
Specify Gibidi
Automatic Systems lanes used on busier car parks and controlled entrances.
Specify Automatic Systems
Centurion barrier and gate operators. We check torque and safety devices before adjusting force.
Specify Centurion
SEA barrier and gate controls. Model and board revision are recorded on the survey sheet.
Specify SEA
Fadini hydraulics and electromechanical barriers. Oil leaks and valve settings are part of the service, not an afterthought.
Specify Fadini
LiftMaster operators where a site already uses them on a vehicle entrance.
Specify LiftMaster
Genius barrier and gate operators, including older FAAC-group plant that is still in service.
Specify Genius
Frontier Pitts vehicle barriers and high-security lanes. We service the incumbent and specify CAME where a standard car-park boom is the right replacement.
Specify Frontier Pitts
Paxton Net2 and related readers releasing a barrier. The barrier manufacturer and the access manufacturer are specified separately.
Specify Paxton
Videx panels and GSM modules used at a barrier or gate. Common on the 5m packs listed with CAME hardware.
Specify Videx
HID readers and credentials where a staff barrier must share the building access cards.
Specify HID Global
Comelit video and audio entry when the barrier lane also needs a speech panel.
Specify Comelit
Specification wizard — Dursley
Embedded on this page. It posts to the contact form with the town, brand and job attached. You can also call 07517806082.
Questions for Dursley
Will you service a non-CAME barrier in Dursley?
Yes. The manufacturer grid lists the barrier and access brands this page covers. We identify the cabinet before ordering parts.
What should we send for a Dursley quote?
Lane count, approximate boom length, a photo of the rating plate and how the barrier opens today (loop, fob, reader or attendant).
Can access control release the Dursley lane?
Yes when the fire strategy allows it. Paxton, Videx, HID, Comelit and BPT are listed separately from the barrier manufacturer.
Will you service a non-CAME barrier in Dursley?
Yes. The manufacturer grid lists the barrier and access brands this page covers. We identify the cabinet before ordering parts.
Nearby towns
Speak to Icomply about Dursley
Offerton, Stockport, SK2 5DE. About 119 miles.
Call 07517806082