Vehicle barriers · CAME partner
Vehicle barriers in Felling
mid-sized town · North East · population 34,355
Car-park and yard lanes in Felling are quoted from the lane we can see, not from a national price list. Gazetteer population 34,355. Council area Gateshead. Distance from Stockport SK2: 110 miles.
Felling work tends to be one or two lanes, not a motorway toll plaza. The closest other towns we publish are Gateshead (1.4 miles), Newcastle upon Tyne (2.2 miles), Hebburn (2.6 miles).
Town-centre car parks in Felling punish a slow boom. Yards on the edge of Gateshead punish a light one. Related towns: Gateshead (1.4 miles), Newcastle upon Tyne (2.2 miles), Hebburn (2.6 miles).
CAME is the barrier partner. New booms are specified on the CAME GARD range unless the survey shows the incumbent cabinet, springs and safety edges are still the right kit to keep.
CAME partnership covers new vehicle barriers and the 5m packs on the products hub. It does not mean we refuse to maintain another brand that is already installed in Felling.
We do not raise force to hide a fault. Loops, photocells and safety edges are tested and written down. A barrier that cannot see a vehicle is not a finished job.
Manual release, spring condition and the resting position of the boom are checked on every service. Remote fobs are not a substitute for a working safety edge.
Quotes for Felling are POA after scope. The phone number is 07517806082. WhatsApp uses the same line.
For Gateshead we batch surveys when more than one lane is in the same week. Felling itself is about 110 miles from SK2.
The Gateshead entrance at Felling is not priced from a photograph alone. Nearest published towns are Gateshead (1.4 miles), Newcastle upon Tyne (2.2 miles), Hebburn (2.6 miles). Send the rating plate if you have it. Spring tension is left alone until the lane is isolated.
Manufacturers for Felling
CAME is the partner for new vehicle barriers in Felling. Every brand below has a nameplate and a link to its brand page. Use “Specify” to open the wizard with that manufacturer selected. Installation is POA.
CAME GARD 5m barrier packs on the products hub →
Partner for new vehicle barriers. CAME GARD booms, controls, loops and safety edges. Five-metre packs are on the products hub; installation is POA after survey.
Specify CAME
Existing BFT barriers and gate operators. New lanes are normally specified on the CAME partner range unless the survey supports keeping BFT.
Specify BFT
FAAC barrier and operator servicing, including safety-device checks. New installs default to CAME unless the incumbent system should stay.
Specify FAAC
Nice barrier and gate automation. We identify the control board on site before quoting spares or a takeover.
Specify Nice
Beninca booms and operators. Service and fault work, with CAME specified when a lane is being replaced.
Specify Beninca
Magnetic Autocontrol barriers on car parks and staff entrances. We test loops, photocells and the boom before any control change.
Specify Magnetic Autocontrol
Hormann barriers and related door operators where they control a vehicle lane.
Specify Hormann
Roger Technology barriers and 24V operators. Useful where a brushless incumbent is still supportable.
Specify Roger Technology
Ditec barriers and automation. Service of the existing lane, or a CAME replacement when the cabinet is no longer viable.
Specify Ditec
Tau barrier and gate gear. We confirm the model on the rating plate rather than guessing from the boom colour.
Specify Tau
Cardin operators on barriers and gates. Radio and loop faults are quoted separately from a full lane replacement.
Specify Cardin
Gibidi barrier motors and controls. Existing plant is serviced; new booms are CAME unless the site standard says otherwise.
Specify Gibidi
Automatic Systems lanes used on busier car parks and controlled entrances.
Specify Automatic Systems
Centurion barrier and gate operators. We check torque and safety devices before adjusting force.
Specify Centurion
SEA barrier and gate controls. Model and board revision are recorded on the survey sheet.
Specify SEA
Fadini hydraulics and electromechanical barriers. Oil leaks and valve settings are part of the service, not an afterthought.
Specify Fadini
LiftMaster operators where a site already uses them on a vehicle entrance.
Specify LiftMaster
Genius barrier and gate operators, including older FAAC-group plant that is still in service.
Specify Genius
Frontier Pitts vehicle barriers and high-security lanes. We service the incumbent and specify CAME where a standard car-park boom is the right replacement.
Specify Frontier Pitts
Paxton Net2 and related readers releasing a barrier. The barrier manufacturer and the access manufacturer are specified separately.
Specify Paxton
Videx panels and GSM modules used at a barrier or gate. Common on the 5m packs listed with CAME hardware.
Specify Videx
HID readers and credentials where a staff barrier must share the building access cards.
Specify HID Global
Comelit video and audio entry when the barrier lane also needs a speech panel.
Specify Comelit
Specification wizard — Felling
Embedded on this page. It posts to the contact form with the town, brand and job attached. You can also call 07517806082.
Questions for Felling
How far is Felling from your workshop?
About 110 miles from Offerton, Stockport SK2. Attendance is booked around that distance.
Do you remove safety devices to make a boom move?
No. Loops, photocells and safety edges stay in the circuit. A barrier that cannot see an obstruction is not signed off.
Who is the barrier partner for Felling?
CAME. New lanes are specified on CAME GARD unless the survey supports keeping the existing manufacturer. Call 07517806082.
How far is Felling from your workshop?
About 110 miles from Offerton, Stockport SK2. Attendance is booked around that distance.
Nearby towns
Speak to Icomply about Felling
Offerton, Stockport, SK2 5DE. About 110 miles.
Call 07517806082