Vehicle barriers · CAME partner
Vehicle barriers in Rhyl
mid-sized town · Wales · population 25,874
A boom in Rhyl is a safety device with a motor attached. mid-sized town profile, Denbighshire, Wales. Headcount on the town file: 25,874. Road miles from the SK2 bench: 55.
Housing schemes near Rhyl often share one barrier between residents and a delivery window. Other local pages: Prestatyn (3.7 miles), Abergele (4.4 miles), Colwyn Bay (9.8 miles).
Typical lanes around Rhyl are retail car parks, office decks, hospital drop-offs, industrial yards and gated housing. Neighbours on this mainland list include Prestatyn (3.7 miles), Abergele (4.4 miles), Colwyn Bay (9.8 miles).
CAME is the barrier partner. New booms are specified on the CAME GARD range unless the survey shows the incumbent cabinet, springs and safety edges are still the right kit to keep.
CAME partnership covers new vehicle barriers and the 5m packs on the products hub. It does not mean we refuse to maintain another brand that is already installed in Rhyl.
We do not raise force to hide a fault. Loops, photocells and safety edges are tested and written down. A barrier that cannot see a vehicle is not a finished job.
Manual release, spring condition and the resting position of the boom are checked on every service. Remote fobs are not a substitute for a working safety edge.
Quotes for Rhyl are POA after scope. The phone number is 07517806082. WhatsApp uses the same line.
Rhyl is a regional visit, about 55 miles from SK2. We group it with other Wales work where the diaries allow, and we still quote the single lane on its own.
The Denbighshire entrance at Rhyl is not priced from a photograph alone. Road distance from Offerton is about 55 miles. Manual release is demonstrated before we leave. Hydraulic leaks are a reason to keep the visit short and safe.
Manufacturers for Rhyl
CAME is the partner for new vehicle barriers in Rhyl. Every brand below has a nameplate and a link to its brand page. Use “Specify” to open the wizard with that manufacturer selected. Installation is POA.
CAME GARD 5m barrier packs on the products hub →
Partner for new vehicle barriers. CAME GARD booms, controls, loops and safety edges. Five-metre packs are on the products hub; installation is POA after survey.
Specify CAME
Existing BFT barriers and gate operators. New lanes are normally specified on the CAME partner range unless the survey supports keeping BFT.
Specify BFT
FAAC barrier and operator servicing, including safety-device checks. New installs default to CAME unless the incumbent system should stay.
Specify FAAC
Nice barrier and gate automation. We identify the control board on site before quoting spares or a takeover.
Specify Nice
Beninca booms and operators. Service and fault work, with CAME specified when a lane is being replaced.
Specify Beninca
Magnetic Autocontrol barriers on car parks and staff entrances. We test loops, photocells and the boom before any control change.
Specify Magnetic Autocontrol
Hormann barriers and related door operators where they control a vehicle lane.
Specify Hormann
Roger Technology barriers and 24V operators. Useful where a brushless incumbent is still supportable.
Specify Roger Technology
Ditec barriers and automation. Service of the existing lane, or a CAME replacement when the cabinet is no longer viable.
Specify Ditec
Tau barrier and gate gear. We confirm the model on the rating plate rather than guessing from the boom colour.
Specify Tau
Cardin operators on barriers and gates. Radio and loop faults are quoted separately from a full lane replacement.
Specify Cardin
Gibidi barrier motors and controls. Existing plant is serviced; new booms are CAME unless the site standard says otherwise.
Specify Gibidi
Automatic Systems lanes used on busier car parks and controlled entrances.
Specify Automatic Systems
Centurion barrier and gate operators. We check torque and safety devices before adjusting force.
Specify Centurion
SEA barrier and gate controls. Model and board revision are recorded on the survey sheet.
Specify SEA
Fadini hydraulics and electromechanical barriers. Oil leaks and valve settings are part of the service, not an afterthought.
Specify Fadini
LiftMaster operators where a site already uses them on a vehicle entrance.
Specify LiftMaster
Genius barrier and gate operators, including older FAAC-group plant that is still in service.
Specify Genius
Frontier Pitts vehicle barriers and high-security lanes. We service the incumbent and specify CAME where a standard car-park boom is the right replacement.
Specify Frontier Pitts
Paxton Net2 and related readers releasing a barrier. The barrier manufacturer and the access manufacturer are specified separately.
Specify Paxton
Videx panels and GSM modules used at a barrier or gate. Common on the 5m packs listed with CAME hardware.
Specify Videx
HID readers and credentials where a staff barrier must share the building access cards.
Specify HID Global
Comelit video and audio entry when the barrier lane also needs a speech panel.
Specify Comelit
Specification wizard — Rhyl
Embedded on this page. It posts to the contact form with the town, brand and job attached. You can also call 07517806082.
Questions for Rhyl
Will you service a non-CAME barrier in Rhyl?
Yes. The manufacturer grid lists the barrier and access brands this page covers. We identify the cabinet before ordering parts.
What should we send for a Rhyl quote?
Lane count, approximate boom length, a photo of the rating plate and how the barrier opens today (loop, fob, reader or attendant).
Can access control release the Rhyl lane?
Yes when the fire strategy allows it. Paxton, Videx, HID, Comelit and BPT are listed separately from the barrier manufacturer.
Will you service a non-CAME barrier in Rhyl?
Yes. The manufacturer grid lists the barrier and access brands this page covers. We identify the cabinet before ordering parts.
Nearby towns
Speak to Icomply about Rhyl
Offerton, Stockport, SK2 5DE. About 55 miles.
Call 07517806082