Every type of brickwork & masonry job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Repointing
Crumbling mortar raked out and replaced to match, keeping walls weathertight and stopping damp getting in.
- When you need it
- Mortar is soft, cracked or missing, or damp is showing on inside walls.
- What's involved
- Old mortar raked out to depth, joints cleaned and wetted, new mortar pointed in to match and the face cleaned.
- How long it takes
- Often two to five days for an elevation.
- Who it's for
- Domestic, commercial and industrial repointing
Wall repairs
Cracked, spalled or damaged brickwork repaired or rebuilt, with replacement bricks matched as closely as possible.
- When you need it
- Bricks are spalling, cracked or loose, or a section of wall has been damaged.
- What's involved
- Damaged bricks cut out, wall supported if needed, new bricks laid in matching mortar and the joints finished.
- How long it takes
- Often a day for small repairs.
- Who it's for
- Domestic, commercial and industrial wall repairs
Garden walls
Garden and boundary walls built or rebuilt on proper foundations, with copings that shed water and protect the brickwork.
- When you need it
- You need a new boundary, or an old wall is leaning or falling down.
- What's involved
- Old wall taken down if needed, foundation dug and poured, wall built with piers where required and coping fitted.
- How long it takes
- Often two to four days.
- Who it's for
- Domestic and commercial garden walls
Extension brickwork
Brickwork, blockwork and cavity work for extensions, built to the drawings and tied into the existing house.
- When you need it
- An extension has its foundations in and is ready to build up.
- What's involved
- Walls set out, blockwork and facing brick laid with cavity insulation, ties, lintels and cavity trays up to roof level.
- How long it takes
- Often one to three weeks.
- Who it's for
- Domestic and commercial extension brickwork
Crack stitching
Cracks in brickwork stabilised with stainless steel bars bonded into the mortar joints, often avoiding the need for a rebuild.
- When you need it
- Stepped or vertical cracks appear in a wall and the cause of the movement has been looked into.
- What's involved
- Joints across the crack raked out, bars set in grout, the crack filled and the joints repointed to match.
- How long it takes
- Often a day.
- Who it's for
- Domestic and commercial crack stitching
Lintel replacement
Failed or cracked lintels over windows and doors replaced, stopping the brickwork above from sagging or dropping.
- When you need it
- Brickwork above an opening has cracked or dropped, or a lintel is rusting or rotten.
- What's involved
- Wall propped, brickwork taken out above the opening, new lintel bedded, then brickwork rebuilt and pointed.
- How long it takes
- Usually one to two days.
- Who it's for
- Domestic and commercial lintel replacement
Wall tie replacement
Corroded cavity wall ties replaced with new remedial ties, stopping further cracking and bulging in outer walls.
- When you need it
- Horizontal cracks appear in mortar joints, or a survey finds the wall ties have corroded.
- What's involved
- Old ties located and isolated or removed, new remedial ties drilled and fixed, and holes made good to match.
- How long it takes
- Often two to four days for a house.
- Who it's for
- Domestic and commercial wall tie replacement
Brick cleaning
Dirt, paint and staining cleaned from brickwork using methods that suit the brick and do not damage its face.
- When you need it
- Brickwork is stained, painted over or marked with white salt deposits.
- What's involved
- Test patch done, then cleaning by low-pressure steam, poultice or a suitable chemical, and the area rinsed down.
- How long it takes
- Usually one to three days.
- Who it's for
- Domestic, commercial and industrial brick cleaning
Blockwork walls
Internal and external blockwork walls built for garages, outbuildings, plant rooms and commercial units.
- When you need it
- You need a solid wall for a garage, outbuilding, plant room or unit.
- What's involved
- Wall set out, blocks laid on a foundation or slab with ties and lintels, ready for render or plaster.
- How long it takes
- Usually one to three days.
- Who it's for
- Domestic, commercial and industrial blockwork walls
Stonework repairs
Natural stone walls, sills and heads repaired or rebuilt using matching stone, and lime mortar where it suits the building.
- When you need it
- Stone is weathered, sills are cracked, or a stone wall has partly collapsed.
- What's involved
- Damaged stone cut out or rebuilt, replacement stone dressed to fit, then pointed in a mortar that suits the original.
- How long it takes
- Often one to three days.
- Who it's for
- Domestic and commercial stonework repairs