Every type of evacuation alert systems job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
System servicing
Testing panels and floor sounders.
- When you need it
- The system is due its routine service or has no recent test record.
- What's involved
- Control panel, sounders and visual indicators tested floor by floor, batteries checked and a report issued.
- How long it takes
- Usually half a day to a day, depending on the number of floors.
- Who it's for
- Domestic and commercial system servicing
Fault repairs
Clearing faults so the system is ready for fire service use.
- When you need it
- The panel shows a fault, or some floors do not sound during a test.
- What's involved
- Fault traced through the panel, wiring and sounders, repaired and the affected floors retested.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic and commercial fault repairs
Evacuation alert installation
New evacuation alert systems for high-rise residential blocks, letting firefighters sound alerts floor by floor when needed.
- When you need it
- A new or refurbished high-rise residential block needs an evacuation alert system.
- What's involved
- System designed, cabling, control panel, sounders and visual alerts fitted on each floor, then commissioned and handed over.
- How long it takes
- Often one to two weeks, depending on the height of the block.
- Who it's for
- Domestic and commercial evacuation alert installation
Sounder and beacon replacement
Replacing faulty sounders and visual beacons in flats and common areas so every resident receives the alert.
- When you need it
- Sounders or beacons fail a test, or have been damaged or removed.
- What's involved
- Faulty device removed, matched replacement fitted and tested from the panel.
- How long it takes
- Usually under an hour per device.
- Who it's for
- Domestic and commercial sounder and beacon replacement
Battery and power supply replacement
New standby batteries and power supplies for alert panels so the system keeps working through a mains failure.
- When you need it
- The panel shows a battery or supply fault, or batteries fail a load test.
- What's involved
- Batteries load-tested, replaced and charged, then standby operation checked.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic and commercial battery and power supply replacement
Evacuation alert panel upgrades
Replacing damaged or unreliable firefighter control panels so the system is easy to use and clearly shows each floor.
- When you need it
- The panel is damaged, unreliable, or parts are no longer available.
- What's involved
- New panel fitted, existing circuits reconnected and every floor tested from the new controls.
- How long it takes
- Usually one to two days.
- Who it's for
- Domestic and commercial evacuation alert panel upgrades
Wiring and cable repairs
Repairing damaged fire-resisting cables between the panel and each floor, often after other contractors have worked nearby.
- When you need it
- Faults appear after building works, or cables are damaged or exposed.
- What's involved
- Damaged sections traced and replaced with suitable fire-resisting cable, then circuits tested.
- How long it takes
- Usually a few hours to a day.
- Who it's for
- Domestic and commercial wiring and cable repairs
Evacuation alert surveys
An inspection of an existing or planned system, reporting on its condition, coverage and the work it needs.
- When you need it
- You have taken over a block, or need to know what an evacuation alert system would involve.
- What's involved
- Building, panel and devices inspected, coverage checked floor by floor and a report issued.
- How long it takes
- Usually half a day.
- Who it's for
- Domestic and commercial evacuation alert surveys
Handover and user training
Showing building managers how the system works and how firefighters will use it, with notes left for the building file.
- When you need it
- A new system has been handed over, or building managers have changed.
- What's involved
- Walk-through of the panel, controls and floors, a live demonstration and handover notes left on site.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic and commercial handover and user training
Alerts for deaf residents
Flashing beacons or vibrating pads in flats so residents with hearing loss are warned when an evacuation alert sounds.
- When you need it
- Residents with hearing loss need visual or vibrating alerts in their flat.
- What's involved
- Needs discussed with the resident, beacons or vibrating pads fitted and tested from the panel.
- How long it takes
- Usually an hour or two per flat.
- Who it's for
- Domestic and commercial alerts for deaf residents