Every type of water hygiene monitoring job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Monthly temperature monitoring
Monthly hot and cold water temperature readings at sentinel outlets, calorifiers and tanks.
- When you need it
- Your risk assessment asks for monthly temperature checks.
- What's involved
- Sentinel outlets run and measured, calorifier and tank temperatures recorded, results logged and issues reported.
- How long it takes
- Usually an hour or two per building.
- Who it's for
- Domestic and commercial monthly temperature monitoring
Little-used outlet flushing
Regular flushing of taps and showers that are rarely used to stop water stagnating.
- When you need it
- Some outlets in empty rooms or flats are not used each week.
- What's involved
- Each listed outlet run for the set time, details recorded in the flushing log.
- How long it takes
- Usually under an hour per visit.
- Who it's for
- Domestic and commercial little-used outlet flushing
TMV servicing
Servicing of thermostatic mixing valves to keep outlet temperatures safe and stable.
- When you need it
- Your TMVs are due their service or outlet temperatures are drifting.
- What's involved
- Valve isolated, strainers and parts cleaned, fail-safe tested, temperature set and recorded.
- How long it takes
- Usually under an hour per valve.
- Who it's for
- Domestic and commercial TMV servicing
Cold water tank inspection
Inspection of cold water storage tanks for debris, damage, lid condition and temperature.
- When you need it
- Your risk assessment asks for regular tank checks.
- What's involved
- Tank lid lifted, condition and water checked, temperatures taken, photos and findings recorded.
- How long it takes
- Usually under an hour per tank.
- Who it's for
- Domestic, commercial and industrial cold water tank inspection
Water tank cleaning and disinfection
Draining, cleaning and disinfecting cold water storage tanks found dirty or contaminated.
- When you need it
- A tank inspection has found sediment, debris or contamination.
- What's involved
- Tank isolated and drained, cleaned, disinfected, flushed, refilled and returned to service.
- How long it takes
- Usually half a day per tank.
- Who it's for
- Domestic, commercial and industrial water tank cleaning and disinfection
Shower head descaling
Removing, cleaning and descaling shower heads and hoses to reduce bacterial build-up.
- When you need it
- Your risk assessment asks for regular shower head cleaning.
- What's involved
- Heads and hoses removed, descaled and disinfected, refitted and checked, visit recorded.
- How long it takes
- Usually a few minutes per shower.
- Who it's for
- Domestic and commercial shower head descaling
Calorifier inspection and blowdown
Inspection and draining of hot water cylinders and calorifiers to remove sediment.
- When you need it
- Your risk assessment asks for regular calorifier checks.
- What's involved
- Temperatures checked, drain opened to flush sediment, condition noted and readings logged.
- How long it takes
- Usually under an hour per unit.
- Who it's for
- Domestic, commercial and industrial calorifier inspection and blowdown
Legionella logbook setup
A water hygiene logbook set up with an asset list, schedule and record sheets.
- When you need it
- You have a risk assessment but no clear way to record checks.
- What's involved
- Assets listed from the risk assessment, task schedule set up, record sheets prepared.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic, commercial and industrial legionella logbook setup
Void property water flushing
Flushing water systems in empty homes and buildings before new tenants or reopening.
- When you need it
- A property has been empty and the water has been standing.
- What's involved
- All outlets run in order, temperatures checked, any issues noted and flushing recorded.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic and commercial void property water flushing
Water hygiene remedial works
Repairs found during monitoring, such as dead legs, faulty valves and poor insulation.
- When you need it
- Monitoring has shown problems that need fixing.
- What's involved
- Fault confirmed, pipework or valves repaired, insulation added and system rechecked.
- How long it takes
- Usually a few hours to a day.
- Who it's for
- Domestic, commercial and industrial water hygiene remedial works