Every type of damp proofing job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Damp surveys
Damp surveys that find the real cause, whether rising damp, penetrating damp, leaks or condensation, before anything is treated.
- When you need it
- You have damp patches, peeling paint or a musty smell, or a survey has flagged damp.
- What's involved
- Walls, floors and outside checked with moisture meters, ventilation and drainage looked at, and a written report given.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic and commercial damp surveys
Condensation fixes
Condensation tackled with better ventilation and practical advice, cutting down wet windows and black mould.
- When you need it
- Windows stream with water and mould appears in corners and behind furniture.
- What's involved
- Humidity and ventilation checked, extractor fans fitted or upgraded, and trickle vents cleared or added.
- How long it takes
- Often half a day to a day.
- Who it's for
- Domestic and commercial condensation fixes
Damp proof courses
Chemical damp proof courses injected into walls where rising damp is confirmed, then replastered with a suitable mix.
- When you need it
- A survey confirms rising damp from a failed or missing damp proof course.
- What's involved
- Plaster removed, holes drilled along the mortar line, damp proof cream injected, then walls replastered with a salt-resistant render.
- How long it takes
- Often two to three days, plus drying.
- Who it's for
- Domestic and commercial damp proof courses
Mould treatment
Mould cleaned off and treated, with the underlying cause tackled so it is less likely to come back.
- When you need it
- Black mould is growing on walls, ceilings or window reveals.
- What's involved
- Affected areas cleaned and treated with a fungicidal wash, surfaces sealed or redecorated, and ventilation improved.
- How long it takes
- Usually half a day.
- Who it's for
- Domestic and commercial mould treatment
Basement tanking
Basements and cellars waterproofed with tanking or cavity drain membranes, turning damp spaces into usable rooms.
- When you need it
- A cellar or basement is damp or wet and you want to use it.
- What's involved
- Walls and floor prepared, waterproof slurry or a cavity drain membrane fitted, with drainage and a sump pump if needed.
- How long it takes
- Often one to two weeks.
- Who it's for
- Domestic and commercial basement tanking
Penetrating damp repairs
Rain getting in through walls stopped at the source by fixing pointing, gutters, render and window sills.
- When you need it
- Damp patches grow after rain, often on exposed walls.
- What's involved
- Cause traced outside, then repointing, render repairs, gutter fixes or a masonry water repellent carried out.
- How long it takes
- Often one to three days.
- Who it's for
- Domestic and commercial penetrating damp repairs
Positive input ventilation
Loft-mounted units that gently push filtered air into the house, reducing condensation and stale air in every room.
- When you need it
- Condensation and mould affect several rooms despite extractor fans.
- What's involved
- Unit fitted in the loft, diffuser set in the landing ceiling, wired to a supply and set to the right speed.
- How long it takes
- Usually half a day.
- Who it's for
- Domestic positive input ventilation
Wet and dry rot treatment
Timber decay identified and treated, with affected joists, skirtings and floorboards cut out and replaced.
- When you need it
- Timber feels soft or smells musty, or fungus or white strands appear.
- What's involved
- Rot type confirmed, moisture source fixed, decayed timber removed, new treated timber fitted and surrounding areas treated.
- How long it takes
- Often two to five days.
- Who it's for
- Domestic and commercial wet and dry rot treatment
Airbrick and subfloor ventilation
Blocked or missing airbricks cleared and added, so suspended timber floors stay dry and are less prone to rot.
- When you need it
- Floors feel damp or soft, or airbricks have been covered by paths or render.
- What's involved
- Airbricks located and cleared, new ones cut in where needed, with sleeves through the cavity.
- How long it takes
- Usually half a day.
- Who it's for
- Domestic and commercial airbrick and subfloor ventilation
Landlord damp and mould reports
Damp and mould inspections for landlords and housing providers, with clear findings and a practical repair plan.
- When you need it
- A tenant reports damp or mould and you need to act quickly and record what was done.
- What's involved
- Property inspected, readings and photos taken, cause identified, and a report with recommended works issued.
- How long it takes
- Usually an hour or two on site.
- Who it's for
- Domestic and commercial landlord damp and mould reports