Every type of gas safety job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Landlord gas safety certificates
Annual checks for rented homes.
- When you need it
- You let a property with gas appliances and the last check is nearly a year old.
- What's involved
- Each appliance, flue and the pipework checked for safe operation, ventilation checked and a record issued.
- How long it takes
- Usually under an hour for a typical home.
- Who it's for
- Domestic and commercial landlord gas safety certificates
Boiler servicing
Annual service for efficiency and safety.
- When you need it
- The boiler has not been serviced in the last year, or the manufacturer's warranty needs it.
- What's involved
- Boiler opened, burner, heat exchanger and seals checked, combustion analysed and safety devices tested.
- How long it takes
- Usually under an hour.
- Who it's for
- Domestic and commercial boiler servicing
Appliance repairs
Hobs, fires and boilers repaired.
- When you need it
- A hob, gas fire or boiler is not working properly or shows a fault.
- What's involved
- Fault diagnosed, parts replaced and the appliance tested for safe operation.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic and commercial appliance repairs
Commercial gas checks
Kitchens and plant rooms checked.
- When you need it
- A commercial kitchen, plant room or business premises needs its gas installation checked.
- What's involved
- Appliances, pipework, interlocks, ventilation and isolation valves checked, and a record issued.
- How long it takes
- Usually one to three hours.
- Who it's for
- Commercial and industrial commercial gas checks
Gas leak investigations
Tracing gas smells and pressure drops, then repairing the leak and leaving pipework and appliances safe to use.
- When you need it
- You have smelled gas or a tightness test has failed, once the gas emergency service has made the supply safe.
- What's involved
- Tightness test carried out, leak located, joints or pipework repaired and the system retested.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial gas leak investigations
Gas pipework installation
New or rerouted gas pipework for appliances, kitchens and extensions, tested and left safe for use.
- When you need it
- A new appliance, kitchen refit or extension needs gas pipework.
- What's involved
- Route planned, pipe sized and installed, tightness tested and purged, then appliances connected.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic, commercial and industrial gas pipework installation
Gas hob and cooker installation
Fitting and connecting gas hobs and cookers safely, with checks to confirm they are working correctly before you use them.
- When you need it
- You have a new gas hob or cooker, or are replacing an old one.
- What's involved
- Old appliance disconnected, new one connected, tightness tested and burners and safety devices checked.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic and commercial gas hob and cooker installation
Boiler replacement
Swapping old or failing boilers for new efficient models, with the flue, controls and heating system checked and set up.
- When you need it
- The boiler is old, unreliable, or repairs are no longer worth the money.
- What's involved
- Old boiler removed, system flushed, new boiler, flue and controls fitted, then commissioned and registered.
- How long it takes
- Usually one to two days.
- Who it's for
- Domestic and commercial boiler replacement
Gas fire servicing
Servicing gas fires to check the flue, ventilation and burner so they run safely through the colder months.
- When you need it
- The gas fire has not been serviced in the last year, or burns with a poor flame.
- What's involved
- Fire stripped and cleaned, flue and ventilation checked, burner and safety devices tested.
- How long it takes
- Usually under an hour.
- Who it's for
- Domestic gas fire servicing
Carbon monoxide investigations
Investigating CO alarms or signs of poor combustion, then making the appliance safe and fixing the cause.
- When you need it
- A CO alarm has sounded, or appliances show sooting, staining or lazy yellow flames.
- What's involved
- Appliances and flues checked, combustion analysed, unsafe appliances isolated and faults repaired.
- How long it takes
- Usually one to three hours.
- Who it's for
- Domestic and commercial carbon monoxide investigations