Every type of property inspections job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Periodic rental inspection
A routine visit with a photo report on condition, safety and repairs, so small problems are caught early.
- When you need it
- Every few months during a tenancy, or as your agreement allows.
- What's involved
- We arrange access with the tenant, check each room, test alarms and send a photo report.
- How long it takes
- Usually 30 to 60 minutes per property.
- Who it's for
- Domestic periodic rental inspection
Check-in inventory report
A detailed record of condition and contents at the start of a tenancy, helping settle deposit questions later.
- When you need it
- Before a new tenant moves in.
- What's involved
- We photograph and describe each room, fixtures, fittings and meter readings in a dated report.
- How long it takes
- Usually 1 to 3 hours, depending on size.
- Who it's for
- Domestic check-in inventory report
Check-out inspection report
A comparison against the check-in record at the end of a tenancy, showing any damage beyond fair wear.
- When you need it
- When a tenant is moving out.
- What's involved
- We inspect each room, compare it with the inventory, take photos and note meter readings.
- How long it takes
- Usually 1 to 2 hours.
- Who it's for
- Domestic check-out inspection report
Damp and mould inspection
A focused check for damp, mould and condensation that finds the likely cause and the fix needed.
- When you need it
- When a tenant reports mould, damp patches or musty smells.
- What's involved
- We take moisture readings, check ventilation, gutters and leaks, then report the cause and repairs.
- How long it takes
- Typically 1 to 2 hours.
- Who it's for
- Domestic and commercial damp and mould inspection
Smoke and CO alarm testing
Every smoke and carbon monoxide alarm tested and recorded, with faulty or missing alarms replaced.
- When you need it
- At the start of each tenancy and during routine inspections.
- What's involved
- We test each alarm, check expiry dates, replace failed units and record the results.
- How long it takes
- Usually under an hour.
- Who it's for
- Domestic and commercial smoke and CO alarm testing
Communal area inspection
Regular checks of shared hallways, stairs and bin stores in blocks, with hazards and repairs reported.
- When you need it
- For blocks of flats and shared buildings on a set schedule.
- What's involved
- We walk the common parts, check lighting, doors, alarms and obstructions, then send a photo report.
- How long it takes
- Usually 1 to 2 hours per block.
- Who it's for
- Domestic and commercial communal area inspection
HMO management inspection
Routine checks of an HMO's shared areas, fire safety and condition, helping managers keep on top of their duties.
- When you need it
- On a regular schedule for licensed or shared houses.
- What's involved
- We check fire doors, alarms, escape routes, shared kitchens and bathrooms, and log repairs.
- How long it takes
- Usually 1 to 2 hours.
- Who it's for
- Domestic and commercial HMO management inspection
Leak and water ingress check
A check to trace where water is getting in, from roofs, gutters, windows or plumbing, before damage spreads.
- When you need it
- When stains, drips or wet patches appear inside the property.
- What's involved
- We inspect inside and out, take moisture readings and report the source with a repair plan.
- How long it takes
- Usually 1 to 2 hours.
- Who it's for
- Domestic and commercial leak and water ingress check
Empty property inspection
Regular visits to an unoccupied property to check security, leaks and condition, often needed for insurance.
- When you need it
- When a property is empty between tenants, during probate or awaiting sale.
- What's involved
- We check doors, windows, water, heating and post, then send a dated photo report.
- How long it takes
- Usually 30 to 45 minutes per visit.
- Who it's for
- Domestic and commercial empty property inspection
Roof and external inspection
A check of roofs, gutters, chimneys and walls from the ground and safe access points, with a repair list.
- When you need it
- Before winter, after storms or as part of planned maintenance.
- What's involved
- We inspect the outside of the building, photograph defects and price any repairs needed.
- How long it takes
- Usually 1 to 2 hours.
- Who it's for
- Domestic, commercial and industrial roof and external inspection