Every type of landlord compliance job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Certificate bundles
Electrical, gas, energy and alarm checks in one visit.
- When you need it
- Several certificates are due on the same property.
- What's involved
- Electrical, gas, energy and alarm checks booked into one visit and certificates issued together.
- How long it takes
- Usually half a day per property.
- Who it's for
- Domestic and commercial certificate bundles
HMO compliance
Fire alarms, emergency lighting, fire doors and assessments.
- When you need it
- You are licensing an HMO or the council has asked for fire safety works.
- What's involved
- Fire alarms, emergency lighting and fire doors checked against the assessment and remedial works carried out.
- How long it takes
- Often one to three days, depending on the property.
- Who it's for
- Domestic and commercial HMO compliance
Portfolio management
All your properties tracked with reminders.
- When you need it
- You have several properties and keep losing track of renewal dates.
- What's involved
- Every certificate logged against each property with reminders sent before expiry.
- How long it takes
- Ongoing.
- Who it's for
- Domestic and commercial portfolio management
Pre-tenancy checks
Everything ready before a new tenant moves in.
- When you need it
- A new tenant is due to move in.
- What's involved
- Required certificates checked as current, alarms tested and paperwork prepared for the tenant.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic pre-tenancy checks
Landlord EICRs
Electrical installation condition reports for rental properties, showing the wiring is safe for tenants to live with.
- When you need it
- Your rental property's electrical report is due or missing.
- What's involved
- Consumer unit and circuits inspected and tested, defects coded and the report issued.
- How long it takes
- Usually two to four hours.
- Who it's for
- Domestic and commercial landlord EICRs
Gas safety certificates
Annual gas safety checks on boilers, fires and cookers arranged through a registered gas engineer.
- When you need it
- Your gas safety record is due for renewal.
- What's involved
- Each gas appliance and flue checked, results recorded and a copy issued for the tenant.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic gas safety certificates
EPC assessments
Energy performance certificates for rental properties, with a rating and suggestions for improving efficiency.
- When you need it
- You are letting a property and need a current energy certificate.
- What's involved
- Property measured, insulation, heating and windows recorded and the certificate lodged.
- How long it takes
- Usually an hour.
- Who it's for
- Domestic and commercial EPC assessments
Smoke and CO alarms
Smoke alarms on every storey and carbon monoxide alarms where needed, fitted and tested for rental homes.
- When you need it
- Alarms are missing, expired or a new tenancy is starting.
- What's involved
- Alarms fitted or replaced in suitable positions and tested on the day the tenancy starts.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic smoke and CO alarms
Portable appliance testing
Electrical appliances supplied with a rental tested and labelled so tenants receive safe equipment.
- When you need it
- You supply appliances in a furnished let or HMO.
- What's involved
- Each appliance inspected and tested, labelled and results recorded.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic and commercial portable appliance testing
Fire risk assessments
Fire risk assessments for HMOs and the communal areas of flats, with clear actions to reduce risk.
- When you need it
- You let an HMO or manage shared areas in a block.
- What's involved
- Building inspected, fire precautions reviewed and a written assessment with actions issued.
- How long it takes
- Usually half a day on site.
- Who it's for
- Domestic and commercial fire risk assessments