Every type of LED & external lighting job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
LED lighting upgrade
Old fluorescent, halogen and sodium fittings replaced with efficient LED fittings across a building.
- When you need it
- Lighting is costly to run, failing often or parts are no longer available.
- What's involved
- Existing fittings surveyed, LED replacements chosen, old fittings removed, new ones fitted and circuits tested.
- How long it takes
- Usually one to several days depending on size.
- Who it's for
- Domestic, commercial and industrial LED lighting upgrade
Office lighting installation
New LED panel and downlight lighting for offices, meeting rooms and reception areas.
- When you need it
- You are fitting out or refurbishing an office and need better light for screen work.
- What's involved
- Layout planned to suit desks, ceiling fittings installed, controls wired and the installation tested and certified.
- How long it takes
- Usually two to five days.
- Who it's for
- Commercial office lighting installation
Warehouse high bay lighting
LED high bay fittings for warehouses, factories and workshops with high ceilings.
- When you need it
- The warehouse is poorly lit, or old high bay lamps keep failing.
- What's involved
- Mounting points set, fittings lifted and fixed using access equipment, circuits wired and light levels checked.
- How long it takes
- Usually two to five days.
- Who it's for
- Commercial and industrial warehouse high bay lighting
External security lighting
Floodlights and sensor lights fitted around buildings to deter intruders and light entrances.
- When you need it
- Areas around the building are dark, or you have had break-ins or vandalism.
- What's involved
- Positions agreed, fittings fixed to walls, cabling run in weatherproof routes, sensors set and tested.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic, commercial and industrial external security lighting
Car park lighting
LED lighting for car parks and yards, mounted on columns or buildings, with timers or sensors.
- When you need it
- The car park is dark, lights have failed or users have raised safety concerns.
- What's involved
- Lighting layout planned, fittings mounted, cabling run and controls set for dusk to dawn use.
- How long it takes
- Usually one to three days.
- Who it's for
- Commercial and industrial car park lighting
Lighting column installation
New lighting columns with foundations, ducting and cabling for car parks, roads and paths.
- When you need it
- You need lighting where there is no wall to fix fittings to.
- What's involved
- Bases dug and concreted, ducts laid, columns erected, cables pulled through, fittings connected and tested.
- How long it takes
- Usually two to five days.
- Who it's for
- Commercial and industrial lighting column installation
Lighting controls and sensors
Presence, daylight and timer controls added so lights only run when and where needed.
- When you need it
- Lights are left on in empty rooms or overnight.
- What's involved
- Circuits assessed, sensors and controllers fitted, settings adjusted and operation checked in each area.
- How long it takes
- Usually half a day to two days.
- Who it's for
- Domestic, commercial and industrial lighting controls and sensors
Garden and driveway lighting
Outdoor lighting for gardens, paths, patios and driveways, with outdoor-rated fittings and safe cable routes.
- When you need it
- You want to use your garden after dark or light a driveway safely.
- What's involved
- Fitting positions agreed, armoured or ducted cable laid, fittings installed and outdoor circuit tested.
- How long it takes
- Usually one to two days.
- Who it's for
- Domestic garden and driveway lighting
Downlight and spotlight fitting
LED downlights fitted to kitchens, bathrooms and living spaces, including fire-rated fittings where needed.
- When you need it
- You are renovating a room or replacing old halogen spotlights.
- What's involved
- Positions marked, ceiling cut out, fittings wired and fixed, dimmers fitted where wanted and circuit tested.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic and commercial downlight and spotlight fitting
External lighting repairs
Fault finding and repair of failed floodlights, bulkheads, column lights and their wiring.
- When you need it
- External lights have stopped working, trip the circuit or stay on all day.
- What's involved
- Circuit tested, faulty fittings, sensors or cables found and replaced, then lights checked after dark settings.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial external lighting repairs