Fire, electrical & security compliance07517 806082
Get a quote

Electrical, Gas & Air Con

SAP, Air Tightness & Sound Testing

SAP calculations, air tightness testing and sound insulation testing for new builds, extensions and conversions that building control needs to sign off. This work is arranged through our vetted specialist partners, with iComply as your single point of contact.

SAP, Air Tightness & Sound Testing: modern apartment building exterior
Specialist partner service. This work is carried out by vetted specialist partners and coordinated by iComply, so you have one point of contact, one quote and one set of paperwork alongside your other building services.
Qualified engineersTrained and equipped for the job
Certificates every timePaperwork you can share with insurers and agents
Clear written quotesKnow the price before we start
Fast responseUrgent faults prioritised

SAP, Air Tightness & Sound Testing made simple

Safe electrics protect people and property. We test, repair and install to keep homes, rentals and workplaces safe and certified.

We arrange the calculations and testing through our vetted specialist partners and keep the timings in step with the build, with iComply as your single point of contact. Where tests show problems, our own trades can help with sealing, insulation and electrical work before a retest.

We work across Lancashire, Greater Manchester and Merseyside, for developers, builders and homeowners.

What's included

  • SAP calculations and energy reports
  • Air tightness testing
  • Sound insulation testing
  • Reports for building control
Modern consumer unit with circuit breakers

How it works

  1. 1
    Book

    Pick a time that suits you or your tenant.

  2. 2
    Inspect

    We check and test the installation.

  3. 3
    Report

    You get a clear report in plain English.

  4. 4
    Put it right

    Any repairs are quoted and done quickly.

Why choose us

  • Qualified electricians
  • Quick turnaround on reports
  • Repairs done fast
  • Certificates sent by email

When to call us

  • Building control has asked for a SAP calculation or energy report
  • Your new build is nearing completion
  • You are converting a building into flats
  • An air tightness test has failed
  • You need an energy certificate for a new home

Questions we get asked

When do I need a SAP calculation?

New dwellings need one, and some extensions and conversions do too depending on how they comply with the energy rules. Your building control officer or designer can confirm what your project needs.

What if the building fails the air tightness test?

The tester will point out where air is leaking so the gaps can be sealed before a retest. Building early with sealing in mind makes a pass more likely.

Who needs sound testing?

It is usually needed on new homes and on conversions that create flats or houses, where walls or floors separate homes. Building control will tell you if your project needs it.

How long does it take?

Most homes and small premises are done in a few hours.

Will the power be off?

Only for short periods while circuits are tested.

Types of SAP, air tightness & sound testing jobs we do

Every type of SAP, air tightness & sound testing job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.

Design stage SAP calculation

Energy calculation for a new dwelling at design stage, showing building control the plans can meet energy rules.

When you need it
You are submitting a building regulations application for a new home.
What's involved
Plans and specifications reviewed, energy model built, results and any recommended changes reported to you.
How long it takes
Usually a few days to a couple of weeks.
Who it's for
Domestic and commercial design stage SAP calculation

As-built SAP and energy certificate

Final SAP calculation based on how the home was built, with the energy certificate needed at completion.

When you need it
The build is finished and building control needs final energy evidence.
What's involved
Build details and test results gathered, model updated, final report and energy certificate issued.
How long it takes
Usually a few days after information is supplied.
Who it's for
Domestic and commercial as-built SAP and energy certificate

Extension SAP calculation

Energy calculation for an extension where large glazing or other features need to be justified to building control.

When you need it
Your extension has more glazing than standard or building control has asked for calculations.
What's involved
Drawings reviewed, existing house and extension modelled, report prepared for building control.
How long it takes
Usually a few days.
Who it's for
Domestic extension SAP calculation

Air tightness testing

Pressure test of a new building to measure air leakage before building control sign-off.

When you need it
Your new build or conversion is close to completion and needs a test result.
What's involved
Fan fitted in a door, building pressurised, leakage measured and a test certificate issued.
How long it takes
Usually a few hours per dwelling.
Who it's for
Domestic, commercial and industrial air tightness testing

Air leakage investigation

Finding where air escapes from a building that failed, or may fail, its air tightness test.

When you need it
A test has failed or you want to check sealing before the formal test.
What's involved
Building pressurised, leaks traced with smoke or thermal checks, problem areas listed for sealing.
How long it takes
Usually a few hours.
Who it's for
Domestic, commercial and industrial air leakage investigation

Sound insulation testing

Airborne and impact sound tests between flats and houses to show separating walls and floors perform well enough.

When you need it
You are completing new attached homes or flats.
What's involved
Test equipment set up in adjoining rooms, sound levels measured and results reported for building control.
How long it takes
Usually half a day to a day.
Who it's for
Domestic and commercial sound insulation testing

Conversion sound testing

Sound testing for buildings converted into flats or houses, where new separating walls and floors must perform.

When you need it
You are converting offices, a house or a commercial building into flats.
What's involved
Test rooms chosen, airborne and impact tests carried out between units, report produced for sign-off.
How long it takes
Usually half a day to a day.
Who it's for
Domestic and commercial conversion sound testing

Commercial energy calculations

Energy calculations for new commercial buildings and conversions so building control can approve the design.

When you need it
You are building or converting commercial premises that need energy compliance evidence.
What's involved
Design reviewed, building energy model prepared, results and any changes needed reported.
How long it takes
Usually one to two weeks.
Who it's for
Commercial and industrial commercial energy calculations

Ventilation testing for new builds

Measuring airflow from extract fans and ventilation systems in new homes for building control.

When you need it
Building control has asked for ventilation test results before completion.
What's involved
Each fan or vent measured with flow equipment, results checked and a report issued.
How long it takes
Usually a few hours per dwelling.
Who it's for
Domestic and commercial ventilation testing for new builds

Failed test remedial support

Practical help sealing and fixing a building after a failed air tightness or sound test, before retesting.

When you need it
A test has failed and you need the work put right quickly.
What's involved
Failure report reviewed, sealing or insulation work carried out by our trades, then a retest arranged.
How long it takes
Usually one to several days.
Who it's for
Domestic, commercial and industrial failed test remedial support

SAP, Air Tightness & Sound Testing: install, maintain and repair

SAP, Air Tightness & Sound Testing installation

Survey, design and a neat, tested installation with full paperwork.

SAP, Air Tightness & Sound Testing maintenance

Planned servicing that keeps it reliable and compliant, with reports after every visit.

SAP, Air Tightness & Sound Testing repair

Fault finding and repairs on any make, with urgent faults prioritised.

Domestic, commercial and industrial

Domestic SAP, air tightness & sound testing

For homes and rental properties: tidy work, clear explanations and certificates for landlords and agents.

Commercial SAP, air tightness & sound testing

For offices, shops, hospitality and managed buildings, planned around your opening hours.

Industrial SAP, air tightness & sound testing

For factories, warehouses and industrial units, working safely around your operations.

Same day service

Urgent SAP, air tightness & sound testing fault? Call 07517 806082. Same-day attendance is often possible, and urgent faults are always prioritised.

SAP, Air Tightness & Sound Testing near me

Searching for SAP, air tightness & sound testing near me? We cover Lancashire, Greater Manchester and Merseyside.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.