Every type of chimney repairs job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Chimney repointing
Failed mortar raked out and repointed so the stack stays weathertight and stable.
- When you need it
- When mortar is crumbling, missing or letting damp into the house.
- What's involved
- We set up safe access, rake out joints, repoint with a suitable mortar and clean down.
- How long it takes
- Usually 1 to 2 days, plus access setup.
- Who it's for
- Domestic and commercial chimney repointing
Chimney stack rebuild
Unstable or badly leaning stacks taken down and rebuilt using matching bricks or stone.
- When you need it
- When the stack is leaning, cracked or has badly eroded brickwork.
- What's involved
- We take the stack down to sound masonry, rebuild it, refit pots and renew flashings.
- How long it takes
- Usually 2 to 5 days, depending on size.
- Who it's for
- Domestic and commercial chimney stack rebuild
Lead flashing repairs
Leaking or lifted flashings around the stack repaired or replaced to stop water getting into the roof.
- When you need it
- When damp appears around the chimney breast or ceiling after rain.
- What's involved
- We remove failed flashing, fit new lead, dress it into the joints and seal.
- How long it takes
- Usually 1 day.
- Who it's for
- Domestic and commercial lead flashing repairs
Chimney pot replacement
Cracked or loose chimney pots replaced and rebedded securely to keep the stack safe.
- When you need it
- When pots are cracked, leaning or have come loose in high winds.
- What's involved
- We remove the old pot, rebed a new one on fresh mortar and check the flaunching.
- How long it takes
- Usually half a day.
- Who it's for
- Domestic and commercial chimney pot replacement
Chimney cowl fitting
Cowls fitted to stop rain, birds and downdraughts, suited to working fires or unused flues.
- When you need it
- When rain, birds or draughts come down the chimney.
- What's involved
- We check the flue use, choose a suitable cowl and fix it securely to the pot.
- How long it takes
- Usually 1 to 3 hours.
- Who it's for
- Domestic and commercial chimney cowl fitting
Chimney capping
Unused chimneys capped to keep rain out while leaving enough ventilation to stop damp in the flue.
- When you need it
- When a fireplace is no longer used or the flue lets water in.
- What's involved
- We fit a vented cap to the pot or stack and make sure the flue still ventilates.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic and commercial chimney capping
Chimney stack removal
An unwanted or unsafe stack taken down below the roof line and the roof made good.
- When you need it
- When the stack is unsafe, no longer needed or costly to keep repairing.
- What's involved
- We take the stack down, cap the remaining masonry and tile or slate over the gap.
- How long it takes
- Usually 2 to 4 days.
- Who it's for
- Domestic and commercial chimney stack removal
Chimney breast removal
Chimney breasts removed inside to gain space, with suitable support fitted for any masonry above.
- When you need it
- When you want more room space and the breast is no longer needed.
- What's involved
- We check what is above, fit support, remove the breast and make good walls and floors.
- How long it takes
- Usually 2 to 5 days.
- Who it's for
- Domestic chimney breast removal
Leaking chimney repairs
Water coming in around the chimney traced and fixed, whether it is flashing, pointing or the crown.
- When you need it
- When stains, damp or drips appear near the chimney breast.
- What's involved
- We inspect the whole stack, find the source and repair flashing, pointing or flaunching.
- How long it takes
- Usually 1 to 2 days.
- Who it's for
- Domestic and commercial leaking chimney repairs
Chimney flaunching repair
Cracked mortar around the top of the stack renewed so water cannot soak down into the brickwork.
- When you need it
- When the mortar around the pots is cracked, crumbling or missing.
- What's involved
- We break out the old flaunching, rebed the pots and lay new sloped mortar.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic and commercial chimney flaunching repair