Every type of pointing & repointing job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Brick repointing
Crumbling mortar raked out and brickwork repointed to keep walls weathertight and looking tidy.
- When you need it
- When mortar joints are eroded, cracked or falling out.
- What's involved
- We rake out joints to depth, repoint with a matching mortar and brush down the wall.
- How long it takes
- Often 2 to 5 days for a house elevation.
- Who it's for
- Domestic, commercial and industrial brick repointing
Stone wall repointing
Stone walls repointed with a mortar that suits the stone, protecting it from damp and frost.
- When you need it
- When joints in stone buildings or walls have washed out or cracked.
- What's involved
- We rake out carefully by hand, repoint with a suitable mortar and finish to the stone.
- How long it takes
- Usually 2 to 5 days, depending on area.
- Who it's for
- Domestic and commercial stone wall repointing
Lime mortar repointing
Lime mortar pointing for older solid-wall buildings, letting walls breathe and helping reduce damp.
- When you need it
- For older brick or stone buildings, or where cement pointing has caused damp.
- What's involved
- We remove unsuitable mortar, repoint in lime, and protect the work while it cures.
- How long it takes
- Usually 3 to 7 days, weather permitting.
- Who it's for
- Domestic and commercial lime mortar repointing
Gable end repointing
Exposed gable walls repointed to stop driving rain soaking through to rooms inside.
- When you need it
- When damp appears on gable walls or the pointing is badly weathered.
- What's involved
- We set up scaffold or access, rake out and repoint the gable, and clean down.
- How long it takes
- Usually 2 to 4 days, plus scaffolding.
- Who it's for
- Domestic and commercial gable end repointing
Patch repointing
Small areas of failed pointing repaired and blended in, without repointing the whole wall.
- When you need it
- When only a few areas of mortar have failed or been damaged.
- What's involved
- We rake out the affected joints, match the mortar colour and repoint to blend in.
- How long it takes
- Usually a few hours to a day.
- Who it's for
- Domestic, commercial and industrial patch repointing
Mortar colour matching
New pointing mixed and finished to match the existing mortar colour and joint style.
- When you need it
- When repairs need to blend in, often on older or attractive buildings.
- What's involved
- We test sample mixes, compare them once dry and point using the chosen mix and joint finish.
- How long it takes
- Adds a few days for samples to dry.
- Who it's for
- Domestic and commercial mortar colour matching
Spalled brick replacement
Cracked or frost-damaged bricks cut out and replaced with matching bricks to protect the wall.
- When you need it
- When brick faces have flaked, cracked or crumbled away.
- What's involved
- We cut out damaged bricks, source matches, bed them in and point to suit.
- How long it takes
- Usually half a day to 2 days.
- Who it's for
- Domestic, commercial and industrial spalled brick replacement
Garden wall repointing
Boundary and garden walls repointed and capped so they stay stable and weathertight.
- When you need it
- When garden walls have loose bricks, open joints or failing copings.
- What's involved
- We rake out and repoint the wall, reset loose bricks and rebed copings.
- How long it takes
- Usually 1 to 3 days.
- Who it's for
- Domestic and commercial garden wall repointing
Cement pointing removal
Hard cement pointing carefully removed from older brick and stone so it can be repointed properly.
- When you need it
- When cement pointing is trapping damp or damaging soft brick or stone faces.
- What's involved
- We cut and rake out the cement by hand or tool without damaging edges, ready for repointing.
- How long it takes
- Usually 2 to 5 days, depending on area.
- Who it's for
- Domestic and commercial cement pointing removal
Commercial building repointing
Repointing of larger elevations on commercial and industrial buildings, planned around access and the site.
- When you need it
- When large walls show widespread mortar loss or water penetration.
- What's involved
- We plan access and phasing, rake out and repoint each area and report on progress.
- How long it takes
- Often 1 to several weeks.
- Who it's for
- Commercial and industrial commercial building repointing