Every type of roller shutters & security shutters job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Shop front shutter installation
A new security shutter over a shop front or doorway, sized and finished to suit the frontage.
- When you need it
- You are opening a new shop or the existing shutter is beyond repair.
- What's involved
- Opening measured, shutter made to size, guides and box fixed, curtain fitted, controls wired and tested.
- How long it takes
- Usually a day once the shutter is made.
- Who it's for
- Commercial shop front shutter installation
Industrial roller door installation
Large roller doors for warehouses, loading bays and workshops, manual or powered.
- When you need it
- You need a new loading door, a wider opening or a replacement for a failed door.
- What's involved
- Opening surveyed, door built to size, fixed to the structure, motor and safety devices fitted and commissioned.
- How long it takes
- Usually one to two days once made.
- Who it's for
- Commercial and industrial industrial roller door installation
Garage roller door installation
Insulated or single-skin roller doors for domestic and commercial garages, with remote control options.
- When you need it
- Your up-and-over door is failing or you want a door that saves driveway space.
- What's involved
- Old door removed, new guides and box fitted, curtain installed, motor wired and remotes programmed.
- How long it takes
- Usually a day.
- Who it's for
- Domestic and commercial garage roller door installation
Manual to electric shutter conversion
Adding a motor, controls and safety devices to an existing manual shutter.
- When you need it
- Daily winding is slow or awkward and the shutter curtain is still sound.
- What's involved
- Curtain and barrel checked, motor fitted, supply and switch wired, limits set and safety tested.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic, commercial and industrial manual to electric shutter conversion
Shutter repair
Fixing shutters that are jammed, off their guides, dropping or not locking properly.
- When you need it
- The shutter will not open or close fully, or makes grinding and banging noises.
- What's involved
- Shutter inspected, fault traced, parts adjusted or replaced and full operation tested.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial shutter repair
Shutter motor replacement
Replacing a burnt-out or failing tube or external motor on an electric shutter.
- When you need it
- The motor hums, trips or does nothing when the switch is pressed.
- What's involved
- Shutter secured, faulty motor removed, new motor fitted, limits set and run tested.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial shutter motor replacement
Shutter servicing
A planned check of springs, guides, motor, controls and safety devices to keep the shutter reliable.
- When you need it
- The shutter is used every day and has not been checked in a long time.
- What's involved
- Shutter cycled, guides cleaned and lubricated, fixings and springs checked, safety devices tested and report issued.
- How long it takes
- Usually an hour or two per shutter.
- Who it's for
- Domestic, commercial and industrial shutter servicing
Slat and curtain repair
Replacing dented, split or forced slats on an existing shutter without the cost of replacing the whole curtain.
- When you need it
- The curtain has been damaged by a vehicle, vandalism or a break-in.
- What's involved
- Shutter lowered, damaged slats removed, new slats fitted to match and operation tested.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial slat and curtain repair
Remote and keyswitch upgrades
Adding remote controls, keyswitches or timer control to make an existing electric shutter easier and more secure to use.
- When you need it
- Staff share a single switch or you want to open the shutter from a vehicle.
- What's involved
- Control unit fitted or upgraded, keyswitch or receiver wired, remotes programmed and tested.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial remote and keyswitch upgrades
Safety edge and photocell fitting
Adding devices that stop or reverse a powered shutter if it meets a person or vehicle.
- When you need it
- Your powered shutter has no safety devices or has failed a safety check.
- What's involved
- Safety edge fixed to the bottom rail, photocells mounted, wiring connected and stop function tested.
- How long it takes
- Usually a few hours.
- Who it's for
- Commercial and industrial safety edge and photocell fitting