Fire, electrical & security compliance07517 806082
Get a quote

Groundworks & Drainage

Manholes, Gullies & Inspection Chambers

New and replacement manholes, inspection chambers and gullies, plus covers, frames and benching repairs. We fit modern plastic chambers or build them in brick, sized for the depth and for whatever drives or walks over them.

Manholes, Gullies & Inspection Chambers: square manhole cover and a gully grate set into block paving
Qualified engineersTrained and equipped for the job
Certificates every timePaperwork you can share with insurers and agents
Clear written quotesKnow the price before we start
Fast responseUrgent faults prioritised

Manholes, Gullies & Inspection Chambers made simple

Drainage, groundworks and external works are mostly hidden once they are finished, so they have to be done properly first time. We survey, dig, build and test, then put the surface back as we found it, or better.

An access point wherever a drain changes direction or joins another means it can be cleared without digging. We add, raise, lower and rebuild chambers to suit new layouts and new paving levels.

We work across Lancashire, Greater Manchester and Merseyside, for homeowners, landlords, managing agents and commercial sites.

What's included

  • Inspection chambers and manholes installed or rebuilt
  • Gully pots and traps replaced or repaired
  • Broken covers and frames replaced with the right load rating
  • Benching and channel repairs inside chambers
Mini digger excavating foundation trenches for a house extension

How it works

  1. 1
    Site visit

    We look at the site and survey the drains or ground where needed.

  2. 2
    Written quote

    A clear, itemised price, with any approvals or permissions flagged.

  3. 3
    Dig, build and test

    Work carried out safely and tested before it is covered up.

  4. 4
    Reinstate and sign off

    Surfaces put back, the site cleared and any paperwork handed over.

Why choose us

  • Survey first, so the dig is in the right place
  • Work tested before it is covered up
  • Tight access handled with mini diggers or by hand
  • Surfaces reinstated and the site left tidy

When to call us

  • A cracked, rocking or missing manhole cover
  • A gully blocked with silt or smelling
  • A chamber that needs raising or lowering for new paving
  • Broken benching inside a manhole
  • No access point to clear a blocked drain

Questions we get asked

What is the difference between a manhole and an inspection chamber?

An inspection chamber is a smaller, shallower access point that you reach from the surface. A manhole is a larger, deeper chamber built so a person can get down to the drain if needed.

My manhole cover is broken. Can you replace it?

Yes. We match the frame size and fit a cover rated for what goes over it, from a garden path to a driveway or car park.

Why does my gully smell?

A gully has a water seal that stops drain smells escaping. If the trap dries out, cracks or fills with silt, smells get out. Cleaning or replacing the gully usually fixes it.

Do you offer free quotes?

Yes, after a free site visit.

Do you take the spoil away?

Yes. Excavated material and waste are removed, unless they are being re-used on site.

Manholes, Gullies & Inspection Chambers: guides, costs and fixes

Types of manholes and inspection chambers jobs we do

Every type of manholes and inspection chambers job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.

Manhole installation

New manholes built or installed where drains join or change direction.

When you need it
New drainage needs an access point, or an existing junction has none.
What's involved
Excavation, base and chamber installed or built, channels and benching formed, cover and frame set to level, then tested.
How long it takes
Usually one to two days.
Who it's for
Domestic, commercial and industrial manhole installation

Inspection chamber replacement

Cracked or failing chambers replaced with new units or rebuilt in brick.

When you need it
A chamber is cracked, leaking, collapsing or full of roots.
What's involved
Old chamber removed, new chamber fitted and connected, surround concreted and the cover set to the finished level.
How long it takes
Usually a day.
Who it's for
Domestic, commercial and industrial inspection chamber replacement

Gully repairs

Broken, blocked or smelling gullies cleaned, repaired or replaced.

When you need it
A gully is blocked, broken, smelling or overflowing.
What's involved
Gully cleaned out and checked, then the grid, pot or trap repaired or replaced and reconnected.
How long it takes
Often a few hours.
Who it's for
Domestic and commercial gully repairs

Manhole cover replacement

Broken, rocking or missing covers and frames replaced with the right load rating.

When you need it
A cover is cracked, rocks when driven over or is missing.
What's involved
Frame size measured, old frame broken out if needed, new frame bedded and the cover fitted with the right load rating.
How long it takes
Usually a few hours.
Who it's for
Domestic, commercial and industrial manhole cover replacement

Benching and channel repairs

Broken benching and channels inside chambers rebuilt, so waste flows straight through instead of collecting.

When you need it
Waste collects in a chamber, or the benching has broken up.
What's involved
Chamber cleaned out, damaged benching broken out, channels reset and new benching formed and finished smooth.
How long it takes
Usually a few hours per chamber.
Who it's for
Domestic, commercial and industrial benching and channel repairs

Manhole raising and lowering

Manhole frames raised or lowered to match new ground or paving levels, removing trip hazards and rocking covers.

When you need it
New paving, a drive or regrading leaves a cover too high or too low.
What's involved
Frame removed, chamber built up or cut down, frame rebedded at the new level and the surround made good.
How long it takes
Usually a few hours per cover.
Who it's for
Domestic, commercial and industrial manhole raising and lowering

Rodding eye installation

Rodding eyes fitted at the head of runs or at awkward bends, giving access to clear blockages.

When you need it
A run has no access for rodding, or blockages are hard to reach.
What's involved
Drain exposed, rodding eye fitted at the right angle, connected, set in concrete and capped at the surface.
How long it takes
Often half a day.
Who it's for
Domestic and commercial rodding eye installation

Recessed manhole covers

Recessed tray covers fitted so manholes blend into block paving, patios and resin surfaces.

When you need it
A cover sits in paving or a patio and you want it to blend in.
What's involved
Old cover and frame removed, recessed tray frame bedded to level, and the tray filled with matching paving.
How long it takes
Usually a few hours.
Who it's for
Domestic and commercial recessed manhole covers

Interceptor trap repairs

Old interceptor traps in manholes cleared, repaired or removed, tackling a common cause of repeated blockages.

When you need it
A chamber keeps filling up because the interceptor trap is blocked or its stopper has dropped in.
What's involved
Chamber emptied, trap and stopper checked, then cleared, replaced or removed with a straight-through channel formed.
How long it takes
Usually a few hours.
Who it's for
Domestic and commercial interceptor trap repairs

Manhole condition surveys

Manhole and gully surveys recording the condition of each chamber, cover and connection across a site.

When you need it
You manage a site or block and need to know the state of its drainage access points.
What's involved
Covers lifted, chambers inspected and photographed, depths and connections noted, and a schedule of repairs issued.
How long it takes
Often half a day for a typical site.
Who it's for
Commercial and industrial manhole condition surveys

Manholes, Gullies & Inspection Chambers for homes, businesses and sites

Domestic manholes and inspection chambers

Homes and rental property: tidy work, clear explanations and surfaces put back properly.

Commercial manholes and inspection chambers

Shops, offices, blocks and managed sites, planned around opening hours and residents.

Industrial manholes and inspection chambers

Yards, units and car parks, built for heavy use and kept open where possible during the work.

Urgent drain problems

Collapsed drain, sewage on the surface or a manhole overflowing? Call 07517 806082. Urgent drainage faults are prioritised.

Manholes, Gullies & Inspection Chambers near me

Searching for manholes and inspection chambers near me? We cover Lancashire, Greater Manchester and Merseyside.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.