Fire, electrical & security compliance07517 806082
Get a quote

Networks & IT

Comms Rooms & Server Racks

We build, tidy and upgrade comms rooms, data cabinets and server racks for offices, schools, warehouses and residential blocks. That covers patching, cable management, power and cooling, so your network equipment is organised, safe and easy to work on.

Comms Rooms & Server Racks: network cabinet with patch panels and cabling in a comms room
Qualified engineersTrained and equipped for the job
Certificates every timePaperwork you can share with insurers and agents
Clear written quotesKnow the price before we start
Fast responseUrgent faults prioritised

Comms Rooms & Server Racks made simple

Fast, reliable connections are essential for any building. We plan, install and support networks that just work.

Our engineers plan the layout, fit the rack, patch and label every connection, and leave a clear record. Our electricians install the dedicated power, and we can also run new data cabling, CCTV and access control back to the same cabinet.

We work across Lancashire, Greater Manchester and Merseyside, for businesses, schools, landlords and IT providers.

What's included

  • Data cabinet and server rack installation
  • Patching, labelling and cable management
  • Dedicated power and UPS supplies
  • Ventilation and cooling for comms rooms
Modern apartment building exterior

How it works

  1. 1
    Survey

    We check the building and your needs.

  2. 2
    Plan

    A simple design and price.

  3. 3
    Install

    Cabling and equipment fitted and tested.

  4. 4
    Handover

    Everything documented and explained.

Why choose us

  • Neat, labelled installs
  • Every cable tested
  • Coverage where you need it
  • Support after installation

When to call us

  • The cabinet is a mess of unlabelled cables
  • Equipment runs hot or the room has no ventilation
  • Network kit is plugged into extension leads
  • You are moving office or adding new equipment
  • Nobody knows which port goes where

Questions we get asked

What size rack or cabinet do I need?

That depends on the equipment and cable count now, plus room to grow. We survey what you have and size the cabinet with spare space.

Can you tidy our cabinet without downtime?

In most cases, yes. We label and plan each connection first, then repatch in stages or out of hours to keep disruption low.

Does a comms room need its own power supply?

A dedicated circuit is recommended so other equipment cannot trip the network. A UPS can also keep equipment running through short power cuts.

Can you work outside office hours?

Yes, to avoid disrupting your team.

Do you supply the equipment?

Yes, or we can install equipment you already have.

Types of comms rooms & server racks jobs we do

Every type of comms rooms & server racks job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.

Data cabinet installation

A wall-mounted or floor-standing data cabinet supplied and fitted to house switches, routers and patch panels safely.

When you need it
You need somewhere safe and secure to house network equipment.
What's involved
Location agreed, cabinet fixed, shelves, patch panels and power strips fitted, cables brought in.
How long it takes
Usually half a day to a day.
Who it's for
Commercial and industrial data cabinet installation

Server rack installation

Full-height server racks assembled, secured and fitted out for servers, storage and networking equipment.

When you need it
You are setting up or expanding a server or comms room.
What's involved
Floor and layout checked, rack assembled and secured, rails and cable trays fitted, equipment mounted.
How long it takes
Usually a day.
Who it's for
Commercial and industrial server rack installation

Comms cabinet tidy-up

Repatching, cable management and labelling of a messy existing cabinet so faults are quick to trace.

When you need it
Cables are tangled, unlabelled and faults are hard to trace.
What's involved
Connections recorded, short patch leads fitted, cable managers added, everything labelled.
How long it takes
Usually half a day to a day, often out of hours.
Who it's for
Commercial and industrial comms cabinet tidy-up

Patch panel and labelling

New patch panels installed with every data port tested, labelled and recorded on a clear schedule.

When you need it
Data points are not labelled or panels are full or damaged.
What's involved
Outlets traced, cables terminated to new panels, each link tested and labelled with a record sheet.
How long it takes
Usually half a day.
Who it's for
Commercial and industrial patch panel and labelling

Comms room power supply

Dedicated circuits and rack power distribution so network equipment no longer relies on extension leads.

When you need it
Kit is running from extension leads or shares a circuit with other loads.
What's involved
New circuit run from the board, sockets or rack power units fitted, installation tested and certified.
How long it takes
Usually half a day to a day.
Who it's for
Commercial and industrial comms room power supply

UPS installation

An uninterruptible power supply fitted to keep network equipment, phones and servers running through short power cuts.

When you need it
Power blips are dropping your network, phones or servers.
What's involved
Load assessed, UPS sized and fitted, equipment connected, changeover tested.
How long it takes
Usually a few hours.
Who it's for
Commercial and industrial UPS installation

Comms room cooling

Ventilation, extraction or air conditioning installed to stop network equipment overheating in small or enclosed comms rooms.

When you need it
Equipment is overheating or the room has no airflow.
What's involved
Heat load assessed, fans or cooling unit installed, controls set and temperature checked.
How long it takes
Usually a day.
Who it's for
Commercial and industrial comms room cooling

Comms room relocation

Moving network equipment, cabinets and cabling to a new room or building with as little downtime as possible.

When you need it
You are reorganising the office or the current room is unsuitable.
What's involved
Move planned, new cabinet and links prepared, equipment moved and repatched with minimal downtime.
How long it takes
Usually one to three days.
Who it's for
Commercial and industrial comms room relocation

Block of flats comms cabinet

Shared comms cabinets for broadband, door entry and CCTV in residential blocks.

When you need it
A new or refurbished block needs a central point for building systems.
What's involved
Cabinet fitted in a secure space, power provided, incoming services and building systems terminated.
How long it takes
Usually a day.
Who it's for
Domestic and commercial block of flats comms cabinet

Comms room security

Locks, access control and CCTV fitted to comms rooms and cabinets so only authorised people reach the equipment.

When you need it
The room or cabinet is unlocked or anyone can get to the equipment.
What's involved
Lockable cabinets or door access fitted, camera installed if needed, keys or fobs issued.
How long it takes
Usually half a day.
Who it's for
Commercial and industrial comms room security

Comms Rooms & Server Racks: install, maintain and repair

Comms Rooms & Server Racks installation

Survey, design and a neat, tested installation with full paperwork.

Comms Rooms & Server Racks maintenance

Planned servicing that keeps it reliable and compliant, with reports after every visit.

Comms Rooms & Server Racks repair

Fault finding and repairs on any make, with urgent faults prioritised.

Domestic, commercial and industrial

Domestic comms rooms & server racks

For homes and rental properties: tidy work, clear explanations and certificates for landlords and agents.

Commercial comms rooms & server racks

For offices, shops, hospitality and managed buildings, planned around your opening hours.

Industrial comms rooms & server racks

For factories, warehouses and industrial units, working safely around your operations.

Same day service

Urgent comms rooms & server racks fault? Call 07517 806082. Same-day attendance is often possible, and urgent faults are always prioritised.

Comms Rooms & Server Racks near me

Searching for comms rooms & server racks near me? We cover Lancashire, Greater Manchester and Merseyside.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.