Every type of fire curtains & fire shutters job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Fire curtain installation
Supply and fit of automatic fire curtains to close off openings, stairs or lift lobbies when the alarm activates.
- When you need it
- You are opening up a layout or the fire strategy calls for a curtain to protect an opening.
- What's involved
- Opening surveyed, head box and guides fixed, controls and batteries wired, alarm link made and drop tested.
- How long it takes
- Usually one to two days per curtain.
- Who it's for
- Domestic, commercial and industrial fire curtain installation
Fire shutter installation
Fire-rated roller shutters fitted to serveries, hatches and openings that need to close automatically in a fire.
- When you need it
- A kitchen servery, hatch or wall opening needs fire protection without a fixed wall.
- What's involved
- Opening measured, shutter and guides fitted, motor and controls wired, linked to the fire alarm and tested.
- How long it takes
- Usually one to two days per shutter.
- Who it's for
- Commercial and industrial fire shutter installation
Fire curtain servicing
Planned service of fire curtains with drop tests, battery checks and a written service record.
- When you need it
- The curtain has not been serviced in the last year, or your fire risk assessment asks for evidence.
- What's involved
- Curtain dropped from the alarm signal, guides and fabric checked, batteries tested, controls reset and report issued.
- How long it takes
- Usually an hour or two per curtain.
- Who it's for
- Domestic, commercial and industrial fire curtain servicing
Fire shutter servicing
Routine service of fire shutters to keep them closing fully and safely when the alarm sounds.
- When you need it
- Shutters are due their regular service or have started running slowly or noisily.
- What's involved
- Shutter run and drop tested, guides cleaned, motor and brake checked, safety edges tested and results recorded.
- How long it takes
- Usually an hour or two per shutter.
- Who it's for
- Commercial and industrial fire shutter servicing
Battery backup replacement
New standby batteries for curtain and shutter controls so they still descend if mains power fails.
- When you need it
- The panel shows a battery fault or the batteries failed a load test.
- What's involved
- Old batteries removed, new ones fitted and charged, unit tested on standby power alone.
- How long it takes
- Usually under an hour per unit.
- Who it's for
- Domestic, commercial and industrial battery backup replacement
Fire alarm interface repair
Fault finding and repair of the link between the fire alarm and the curtain or shutter controls.
- When you need it
- The curtain or shutter stays up when the fire alarm sounds.
- What's involved
- Interface wiring and relays traced, faults repaired, alarm activated and full drop confirmed.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial fire alarm interface repair
Fire curtain fabric repair
Repair or replacement of torn, snagged or damaged fire curtain fabric and bottom bars.
- When you need it
- The fabric has been torn, snagged by equipment or damaged in an impact.
- What's involved
- Damage assessed, fabric section or full curtain replaced, bottom bar refitted and curtain drop tested.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic, commercial and industrial fire curtain fabric repair
Motor and controller replacement
Failed motors, gearboxes or control boards on curtains and shutters replaced with matched parts.
- When you need it
- The unit will not run, makes grinding noises or the controller has failed.
- What's involved
- Faulty part diagnosed, replacement fitted, limits set and unit run and drop tested.
- How long it takes
- Usually half a day.
- Who it's for
- Domestic, commercial and industrial motor and controller replacement
Guide rail and obstruction fixes
Clearing and realigning guide rails so curtains and shutters close fully without snagging.
- When you need it
- The curtain or shutter stops short or jams during a drop test.
- What's involved
- Obstructions cleared, bent guides straightened or replaced, fixings tightened and full closure tested.
- How long it takes
- Usually one to three hours.
- Who it's for
- Domestic, commercial and industrial guide rail and obstruction fixes
Fire curtain condition survey
Inspection of existing curtains and shutters with a report on their condition, faults and recommended works.
- When you need it
- You have taken over a building and do not know the state of its curtains or shutters.
- What's involved
- Each unit inspected and drop tested, faults photographed, findings and priorities set out in a report.
- How long it takes
- Usually half a day for a typical building.
- Who it's for
- Domestic, commercial and industrial fire curtain condition survey