Fire, electrical & security compliance07517 806082
Get a quote

Electrical, Gas & Air Con

Standby Generators & UPS

Standby generator connections, changeover switches and UPS systems that keep power to critical equipment when the mains supply fails. For businesses, care homes, comms rooms and industrial sites, plus homeowners who want a safe way to run a generator.

Standby Generators & UPS: modern consumer unit with circuit breakers
Qualified engineersTrained and equipped for the job
Certificates every timePaperwork you can share with insurers and agents
Clear written quotesKnow the price before we start
Fast responseUrgent faults prioritised

Standby Generators & UPS made simple

Safe electrics protect people and property. We test, repair and install to keep homes, rentals and workplaces safe and certified.

Our electricians install changeover switches, generator inlets and UPS units, then test them under load and issue certificates. We can tie the work in with your network cabinets, fire alarm panels and emergency lighting so critical systems stay up together.

We work across Lancashire, Greater Manchester and Merseyside, for businesses, care homes, industrial sites and homeowners.

What's included

  • Generator connection and changeover switch installation
  • UPS supply and fitting for comms and critical loads
  • Servicing, battery checks and load testing
  • Fault finding and repair after a power failure
Modern apartment building exterior

How it works

  1. 1
    Book

    Pick a time that suits you or your tenant.

  2. 2
    Inspect

    We check and test the installation.

  3. 3
    Report

    You get a clear report in plain English.

  4. 4
    Put it right

    Any repairs are quoted and done quickly.

Why choose us

  • Qualified electricians
  • Quick turnaround on reports
  • Repairs done fast
  • Certificates sent by email

When to call us

  • A power cut has stopped your business or site
  • Your UPS is beeping or showing a battery fault
  • The generator has not been load tested in a long time
  • You are adding a server room or comms cabinet
  • You want to run a portable generator safely at home or on site

Questions we get asked

What is the difference between a generator and a UPS?

A UPS gives instant battery power for a short time so equipment does not drop out, while a generator takes over for longer outages. Many sites use both together.

Can I plug a generator into my building's wiring?

Only through a properly installed changeover switch and inlet, so it cannot feed back into the grid. Back-feeding through a socket is dangerous and should never be done.

How often should a standby generator be tested?

Regular run tests and a periodic test under load are recommended, alongside yearly servicing. We set a schedule based on how critical the supply is.

How long does it take?

Most homes and small premises are done in a few hours.

Will the power be off?

Only for short periods while circuits are tested.

Types of standby generators & UPS jobs we do

Every type of standby generators & UPS job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.

Standby generator connection

Wiring a fixed standby generator into the building supply so it can power essential circuits during an outage.

When you need it
You have bought a generator or need backup power for a site that cannot go dark.
What's involved
Load assessed, cables run, generator connected through a changeover, then tested and certified.
How long it takes
Usually one to two days.
Who it's for
Commercial and industrial standby generator connection

Manual changeover switch installation

A switch that lets you safely move the building supply from mains to generator by hand.

When you need it
You want to use a portable or towable generator without back-feeding the grid.
What's involved
Supply isolated, changeover fitted next to the board, circuits connected and switching tested.
How long it takes
Usually half a day to a day.
Who it's for
Domestic, commercial and industrial manual changeover switch installation

Automatic transfer switch installation

A switch that detects mains failure, starts the generator and transfers the load without anyone on site.

When you need it
Your site is unmanned at times or the supply must restore itself during a power cut.
What's involved
Transfer switch fitted, generator start signal wired, mains failure simulated and changeover timings checked.
How long it takes
Usually one to two days.
Who it's for
Commercial and industrial automatic transfer switch installation

Generator inlet socket fitting

An external weatherproof inlet so a portable generator can be plugged in safely without trailing leads indoors.

When you need it
You run a generator during outages and currently feed it through a window or door.
What's involved
Inlet fixed outside, cable run to the changeover switch, connections made and polarity tested.
How long it takes
Usually a few hours.
Who it's for
Domestic and commercial generator inlet socket fitting

Generator servicing

Routine service of a standby generator covering fluids, filters, batteries, controls and a test run.

When you need it
The generator has not been serviced recently or fails to start cleanly.
What's involved
Visual checks, oil and filters changed as needed, start battery tested, test run and service report issued.
How long it takes
Usually a few hours.
Who it's for
Commercial and industrial generator servicing

Generator load testing

Running the generator under realistic load to prove it can carry the site when the mains fails.

When you need it
The generator only ever idles on test runs and has never been proved under load.
What's involved
Load bank or site load connected, generator run for a set period, voltage and frequency recorded, report issued.
How long it takes
Usually half a day.
Who it's for
Commercial and industrial generator load testing

UPS installation for comms cabinets

Battery backup units for servers, network switches, phone systems and CCTV recorders so they ride through power dips.

When you need it
Your network or phones drop out during brief power cuts or flickers.
What's involved
Loads measured, UPS sized and fitted in the cabinet, equipment connected and battery run time tested.
How long it takes
Usually a few hours.
Who it's for
Domestic, commercial and industrial UPS installation for comms cabinets

UPS battery replacement

Replacing worn UPS batteries so the unit can hold the load for its intended run time again.

When you need it
The UPS shows a battery fault, beeps constantly or fails a run time test.
What's involved
Load moved to bypass, old batteries removed and recycled, new batteries fitted and run time tested.
How long it takes
Usually an hour or two.
Who it's for
Domestic, commercial and industrial UPS battery replacement

UPS servicing and fault finding

Inspection and testing of larger UPS systems, plus diagnosis when a unit trips or alarms.

When you need it
The UPS is alarming, switching to bypass or has not been checked in a long time.
What's involved
Logs and alarms reviewed, connections and fans checked, batteries tested and faults repaired or reported.
How long it takes
Usually a few hours.
Who it's for
Commercial and industrial UPS servicing and fault finding

Temporary generator hook-up

Connecting a hired generator to keep a building running during planned shutdowns, works or supply faults.

When you need it
The mains supply is being switched off for works or a fault is waiting for repair.
What's involved
Essential circuits identified, generator positioned and connected safely, supply switched over and back when works finish.
How long it takes
Usually a few hours to set up.
Who it's for
Commercial and industrial temporary generator hook-up

Standby Generators & UPS: install, maintain and repair

Standby Generators & UPS installation

Survey, design and a neat, tested installation with full paperwork.

Standby Generators & UPS maintenance

Planned servicing that keeps it reliable and compliant, with reports after every visit.

Standby Generators & UPS repair

Fault finding and repairs on any make, with urgent faults prioritised.

Domestic, commercial and industrial

Domestic standby generators & UPS

For homes and rental properties: tidy work, clear explanations and certificates for landlords and agents.

Commercial standby generators & UPS

For offices, shops, hospitality and managed buildings, planned around your opening hours.

Industrial standby generators & UPS

For factories, warehouses and industrial units, working safely around your operations.

Same day service

Urgent standby generators & UPS fault? Call 07517 806082. Same-day attendance is often possible, and urgent faults are always prioritised.

Standby Generators & UPS near me

Searching for standby generators & UPS near me? We cover Lancashire, Greater Manchester and Merseyside.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.