Every type of sprinkler systems job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Annual servicing
Valve, alarm, pump and head checks.
- When you need it
- The system has not been serviced in the last year, or an insurer or assessor asks for records.
- What's involved
- Valve sets operated, alarms and flow switches tested, pumps run, tanks and heads checked, then a report issued.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic, commercial and industrial annual servicing
Residential sprinklers
Servicing of systems in flats and care homes.
- When you need it
- Flats, care homes or student blocks have a residential system that is due a service or showing faults.
- What's involved
- Pump, tank, valves, flow switches and alarm link tested, and heads in each area checked.
- How long it takes
- Usually half a day to a day, depending on the number of flats.
- Who it's for
- Domestic and commercial residential sprinklers
Head replacement
Replacing painted, damaged or obstructed heads.
- When you need it
- Heads are painted, damaged, corroded, obstructed or have been knocked.
- What's involved
- Section isolated and drained, faulty heads swapped for the matching type and rating, then refilled and checked.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic, commercial and industrial head replacement
Pump and tank checks
Making sure water supplies are ready.
- When you need it
- Pumps need their routine run, or you are unsure the water supply would cope.
- What's involved
- Pumps started and run, pressures recorded, tank levels, valves and heaters checked.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic, commercial and industrial pump and tank checks
Sprinkler leak repairs
Finding and fixing leaking pipework, joints and valves before water damage spreads or the system has to be shut down.
- When you need it
- There is dripping or damp near sprinkler pipework, or the system keeps losing pressure.
- What's involved
- Leak located, section isolated and drained, joint or pipe repaired, then refilled and pressure checked.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial sprinkler leak repairs
Flow switch and alarm faults
Repairing flow switches, pressure switches and alarm links so a sprinkler operation always raises the alarm.
- When you need it
- Flow switches fail to signal, or the fire alarm does not show a sprinkler activation.
- What's involved
- Switches and wiring tested, faulty parts replaced and the signal proven at the fire alarm panel.
- How long it takes
- Usually two to three hours.
- Who it's for
- Domestic, commercial and industrial flow switch and alarm faults
Sprinkler alterations and extensions
Adding and moving heads when rooms are split, ceilings change or new areas need cover, keeping the whole space protected.
- When you need it
- A refit, new partitions or a ceiling change has left areas without proper coverage.
- What's involved
- Layout checked, pipework extended or altered, heads added or moved, then refilled and tested.
- How long it takes
- Usually one to three days.
- Who it's for
- Domestic, commercial and industrial sprinkler alterations and extensions
Routine sprinkler testing
Weekly or quarterly alarm, valve and pump tests carried out and logged for sites without staff to do them.
- When you need it
- Your routine tests are being missed, or no one on site is trained to do them.
- What's involved
- Alarm valves and motorised bells tested, pumps started, pressures and results logged in the site record.
- How long it takes
- Usually under an hour.
- Who it's for
- Commercial and industrial routine sprinkler testing
Sprinkler drain downs
Safely draining and refilling systems for alterations, repairs or frost risk, keeping the time without cover as short as possible.
- When you need it
- Work on the pipework needs the system drained, or a section needs emptying to prevent freezing.
- What's involved
- Building owner and insurer told where needed, valves isolated, system drained, then refilled, vented and returned to service.
- How long it takes
- Usually a few hours, plus refill time.
- Who it's for
- Commercial and industrial sprinkler drain downs
Sprinkler system surveys
An inspection of an existing system reporting on condition, coverage gaps, obstructions and the work needed after building changes.
- When you need it
- You have taken over a building, the system has no records, or the layout has changed.
- What's involved
- Valves, pumps, tanks, pipework and heads inspected, coverage compared with the layout and a report issued.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic, commercial and industrial sprinkler system surveys