Every type of ventilation & extractor fans job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Bathroom extractor fan
A new bathroom extractor fan fitted to clear steam quickly and stop mould forming.
- When you need it
- When there is no fan, the old one has failed or mould keeps returning.
- What's involved
- We cut or reuse the vent, fit the fan and ducting, wire it in and test the airflow.
- How long it takes
- Usually 2 to 4 hours.
- Who it's for
- Domestic and commercial bathroom extractor fan
Kitchen extractor fan
A kitchen extractor fan or cooker hood ducted outside to remove steam, smells and cooking moisture.
- When you need it
- When condensation, grease or smells build up in the kitchen.
- What's involved
- We fit the fan or hood, run ducting to outside, wire it in and test it.
- How long it takes
- Usually 2 to 5 hours.
- Who it's for
- Domestic and commercial kitchen extractor fan
Humidity-controlled fan upgrade
Fans that switch on automatically when humidity rises, clearing moisture even when nobody remembers to switch them on.
- When you need it
- In rentals and bathrooms where fans are not being used or mould persists.
- What's involved
- We replace the existing fan with a humidity-sensing model, set it up and test it.
- How long it takes
- Usually 1 to 2 hours.
- Who it's for
- Domestic and commercial humidity-controlled fan upgrade
Continuous extract fan
Low-energy fans that run quietly all the time and boost when needed, keeping moisture under control.
- When you need it
- When condensation is a regular problem in a home or flat.
- What's involved
- We fit the fan, set the trickle and boost speeds and check the airflow.
- How long it takes
- Usually 2 to 3 hours.
- Who it's for
- Domestic and commercial continuous extract fan
Positive input ventilation
A loft-mounted unit that gently pushes fresh, filtered air into the home to reduce condensation throughout.
- When you need it
- When condensation and mould affect several rooms, especially in houses and flats.
- What's involved
- We fit the unit in the loft or a cupboard, wire it in and set the airflow.
- How long it takes
- Usually 2 to 4 hours.
- Who it's for
- Domestic positive input ventilation
Condensation and mould assessment
A visit to find why condensation and mould are happening and which ventilation fix will work.
- When you need it
- When mould keeps coming back or a tenant has reported damp.
- What's involved
- We take humidity readings, check fans, vents and heating, and recommend practical fixes.
- How long it takes
- Usually 1 to 2 hours.
- Who it's for
- Domestic and commercial condensation and mould assessment
Fan ducting repairs
Disconnected, crushed or badly routed fan ducting fixed so extracted air actually goes outside.
- When you need it
- When fans are noisy, weak or blowing moist air into the loft.
- What's involved
- We trace the ducting, replace or reroute it to an outside vent and test the fan.
- How long it takes
- Usually 1 to 3 hours.
- Who it's for
- Domestic and commercial fan ducting repairs
Commercial washroom extraction
Extraction for toilets and washrooms in offices, shops and public buildings, sized to the room.
- When you need it
- When washrooms smell, stay damp or the existing extraction has failed.
- What's involved
- We assess the space, fit or replace fans and ducting, wire controls and test airflow.
- How long it takes
- Usually 1 to 2 days.
- Who it's for
- Commercial and industrial commercial washroom extraction
Commercial kitchen ventilation repairs
Repairs to extraction fans and controls in commercial kitchens to keep air moving and the kitchen workable.
- When you need it
- When kitchen extraction is weak, noisy or has stopped working.
- What's involved
- We diagnose the fault, repair or replace fans, motors or controls and test the system.
- How long it takes
- Usually a few hours to a day.
- Who it's for
- Commercial commercial kitchen ventilation repairs
Trickle vent fitting
Trickle vents added to windows to let a steady flow of fresh air in and reduce condensation.
- When you need it
- When windows stream with condensation or rooms lack background ventilation.
- What's involved
- We route slots in the window frames, fit the vents and check they open and close.
- How long it takes
- Usually 1 to 3 hours.
- Who it's for
- Domestic and commercial trickle vent fitting