Fire, electrical & security compliance07517 806082
Get a quote

Fire Safety

Lightning Protection

Lightning protection systems carry a strike safely to ground, protecting tall and exposed buildings, their occupants and the equipment inside. We arrange design, installation, testing and repairs through our vetted specialist partners, with iComply as your single point of contact.

Lightning Protection: modern consumer unit with circuit breakers
Specialist partner service. This work is carried out by vetted specialist partners and coordinated by iComply, so you have one point of contact, one quote and one set of paperwork alongside your other building services.
Qualified engineersTrained and equipped for the job
Certificates every timePaperwork you can share with insurers and agents
Clear written quotesKnow the price before we start
Fast responseUrgent faults prioritised

Lightning Protection made simple

Fire safety systems only matter on the day they are needed. Regular checks and quick repairs make sure they work first time, every time.

We arrange inspection, testing and repairs through our vetted specialist partners, with iComply as your single point of contact from booking to report. Our own electricians can then deal with related surge protection at the distribution board and any faults the report raises.

We work across Lancashire, Greater Manchester and Merseyside, for building owners, managing agents, schools, churches and industrial sites.

What's included

  • Risk assessment and system design
  • Air terminals, down conductors and earthing
  • Periodic inspection and earth resistance testing
  • Repairs, test reports and surge protection advice
Fire alarm control panel mounted in a building corridor

How it works

  1. 1
    Get in touch

    Send us the address and what you need.

  2. 2
    Clear quote

    A simple written price before any work starts.

  3. 3
    Test and fix

    We test everything and fix what we can on the day.

  4. 4
    Certificate

    You get a certificate and a reminder when the next check is due.

Why choose us

  • Systems tested properly, not just looked at
  • Faults fixed on the day where possible
  • Clear certificates after every visit
  • Reminders before the next check is due

When to call us

  • You have no current lightning protection test report
  • Conductor tape is missing, loose or has been stolen
  • The building has been struck or nearby equipment was damaged in a storm
  • Your insurer or fire risk assessor has asked for evidence
  • Roof works, cladding or extensions have disturbed the system

Questions we get asked

Does my building need lightning protection?

It depends on the building's height, exposure, use and contents, so a risk assessment is the starting point. Your insurer or fire risk assessment may also ask for it.

Who carries out the work?

Lightning protection is installed and tested by our vetted specialist partners. iComply arranges the visit, keeps you updated and passes on the report.

What happens after a strike?

The system should be inspected as soon as practical to check conductors, joints and earths are intact. Any damage found is quoted and repaired.

How often does it need checking?

Most fire safety systems need regular routine checks and at least one professional service a year. We will tell you exactly what your building needs.

Can you work on a system someone else installed?

Yes. We service and repair most systems, whoever fitted them.

Types of lightning protection jobs we do

Every type of lightning protection job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.

Lightning protection testing

Periodic inspection and testing of an existing system, with a written report of condition and faults.

When you need it
The last test report is out of date or you have never had one.
What's involved
Visual check of air terminals, conductors and joints, earth resistance tested, results recorded in a report.
How long it takes
Usually half a day to a day, depending on size.
Who it's for
Commercial and industrial lightning protection testing

New lightning protection system

Design and installation of a complete system for a building that has none.

When you need it
A risk assessment, insurer or new build specification calls for protection.
What's involved
Survey and design, air terminals and down conductors fixed, earth electrodes driven, system tested.
How long it takes
Usually several days, depending on the building.
Who it's for
Commercial and industrial new lightning protection system

Stolen conductor replacement

Replacement of copper tapes, clamps and fittings taken by metal thieves, restoring a safe path to earth.

When you need it
Down conductors or earth tapes have been cut and removed.
What's involved
Damage surveyed, replacement conductors fitted, often in a less attractive material to thieves, then tested.
How long it takes
Usually a day or two.
Who it's for
Commercial and industrial stolen conductor replacement

Earth electrode upgrades

Additional or replacement earth rods and plates where test readings show earth resistance is too high.

When you need it
A test report shows high earth resistance or failed electrodes.
What's involved
Test pits dug, new rods driven and bonded, inspection pits fitted, earth retested.
How long it takes
Usually a day.
Who it's for
Commercial and industrial earth electrode upgrades

Post-strike inspection

Inspection of the system and building after a known or suspected lightning strike.

When you need it
The building has been struck or equipment failed during a storm.
What's involved
System walked and tested, scorching or melted joints noted, damage reported with a repair quote.
How long it takes
Usually a few hours.
Who it's for
Commercial and industrial post-strike inspection

Lightning protection repairs

Fixing loose clips, broken joints, damaged test clamps and corroded fittings found on test.

When you need it
A test report lists remedial items.
What's involved
Access arranged, faulty parts replaced, joints cleaned and remade, affected sections retested.
How long it takes
Usually half a day to a day.
Who it's for
Commercial and industrial lightning protection repairs

Lightning risk assessment

An assessment of whether a building needs protection and what level is appropriate.

When you need it
You are unsure whether protection is needed, or the building use has changed.
What's involved
Building height, location, use and contents reviewed, then a written recommendation provided.
How long it takes
Usually a site visit plus a few days for the report.
Who it's for
Commercial and industrial lightning risk assessment

Church and listed building protection

Discreet lightning protection for church spires, towers and historic buildings, fixed sensitively to protect the fabric.

When you need it
A church tower or heritage building needs new or repaired protection.
What's involved
Survey with sensitive fixing methods agreed, conductors routed discreetly, system installed and tested.
How long it takes
Usually several days, often with rope access.
Who it's for
Commercial church and listed building protection

Surge protection coordination

Matching surge protection devices on the electrical installation to the lightning system.

When you need it
A system is being installed or sensitive equipment has been damaged by surges.
What's involved
Incoming supply and boards reviewed, suitable surge devices fitted by our electricians, records updated.
How long it takes
Usually a few hours per board.
Who it's for
Domestic, commercial and industrial surge protection coordination

Roof works reinstatement

Lifting and refitting lightning protection conductors around reroofing, cladding, solar panel or plant installation works.

When you need it
Roofers or other trades need the conductors lifted or rerouted.
What's involved
Conductors recorded and removed, refitted once works finish, continuity and earths retested.
How long it takes
Usually a day at each stage.
Who it's for
Commercial and industrial roof works reinstatement

Lightning Protection: install, maintain and repair

Lightning Protection installation

Survey, design and a neat, tested installation with full paperwork.

Lightning Protection maintenance

Planned servicing that keeps it reliable and compliant, with reports after every visit.

Lightning Protection repair

Fault finding and repairs on any make, with urgent faults prioritised.

Domestic, commercial and industrial

Domestic lightning protection

For homes and rental properties: tidy work, clear explanations and certificates for landlords and agents.

Commercial lightning protection

For offices, shops, hospitality and managed buildings, planned around your opening hours.

Industrial lightning protection

For factories, warehouses and industrial units, working safely around your operations.

Same day service

Urgent lightning protection fault? Call 07517 806082. Same-day attendance is often possible, and urgent faults are always prioritised.

Lightning Protection near me

Searching for lightning protection near me? We cover Lancashire, Greater Manchester and Merseyside.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.