Every type of reactive maintenance & 24/7 helpdesk job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
Electrical fault repairs
Fault finding and repair of tripping circuits, dead sockets, failed lights and damaged fittings.
- When you need it
- Power has gone off in part of a building or a fitting is unsafe.
- What's involved
- Fault traced with test equipment, faulty part repaired or replaced, circuit tested and report issued.
- How long it takes
- Usually one to three hours.
- Who it's for
- Domestic, commercial and industrial electrical fault repairs
Plumbing leak repairs
Repair of leaking pipes, taps, toilets and valves before water causes more damage.
- When you need it
- Water is leaking from pipework, taps or toilets.
- What's involved
- Water isolated, leak located, faulty part repaired or replaced, system tested and area checked.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic, commercial and industrial plumbing leak repairs
Door and lock repairs
Repairs to doors, closers, locks and handles that will not open, close or secure.
- When you need it
- A door will not lock, close properly or has been damaged.
- What's involved
- Door and hardware checked, adjustments made, faulty parts replaced and operation tested.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic, commercial and industrial door and lock repairs
Fire alarm and emergency light faults
Callouts to fault conditions on fire alarm panels and failed emergency lights.
- When you need it
- The fire alarm panel shows a fault or emergency lights have failed a test.
- What's involved
- Panel faults read, devices or batteries tested, faulty parts replaced and system reset.
- How long it takes
- Usually one to three hours.
- Who it's for
- Domestic, commercial and industrial fire alarm and emergency light faults
Leak and damp investigation
Finding the source of leaks, damp patches and water stains on ceilings and walls.
- When you need it
- Damp patches or stains have appeared and the cause is not clear.
- What's involved
- Area inspected, moisture readings taken, source traced to roof, pipe or wall and repairs quoted.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic and commercial leak and damp investigation
Roof and gutter repairs
Repairs to slipped tiles, leaking flat roofs and blocked or broken gutters.
- When you need it
- Water is coming through the roof or gutters are overflowing.
- What's involved
- Safe access arranged, damage found, tiles, felt or gutters repaired and area checked.
- How long it takes
- Usually a few hours.
- Who it's for
- Domestic, commercial and industrial roof and gutter repairs
Void property turnaround repairs
Repairs and checks between tenancies so an empty property is safe and ready to let.
- When you need it
- A tenant has moved out and the property needs to be ready for the next one.
- What's involved
- Property walked, defects listed, repairs carried out across trades and completion photos sent.
- How long it takes
- Usually one to several days.
- Who it's for
- Domestic void property turnaround repairs
Security and access control faults
Repairs to failed door entry systems, maglocks, access readers, CCTV cameras and intruder alarms.
- When you need it
- Residents or staff cannot get in, or cameras or alarms have stopped working.
- What's involved
- System checked, fault traced to power, wiring or device, repaired and tested.
- How long it takes
- Usually one to three hours.
- Who it's for
- Domestic, commercial and industrial security and access control faults
Plastering and minor building repairs
Repairs to damaged plaster, ceilings, skirting and small areas of brickwork or flooring.
- When you need it
- Walls, ceilings or floors have been damaged by leaks, impact or wear.
- What's involved
- Damaged area cut back, made good with plaster or timber, finished and left ready to decorate.
- How long it takes
- Usually half a day to a day.
- Who it's for
- Domestic and commercial plastering and minor building repairs
Drain blockage clearance
Clearing blocked sinks, toilets, gullies and outside drains that are backing up.
- When you need it
- Water is draining slowly, backing up or there is a drain smell.
- What's involved
- Blockage located, cleared with rods or jetting, drain flushed and checked flowing freely.
- How long it takes
- Usually one to two hours.
- Who it's for
- Domestic, commercial and industrial drain blockage clearance