Every type of AOV & smoke control job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.
AOV servicing
Annual test of every vent, actuator, detector and control panel, with a service certificate.
- When you need it
- The system hasn't been serviced in 12 months, or your fire risk assessment asks for evidence.
- What's involved
- Every vent opened and closed, batteries load-tested, detectors and fire alarm link checked, then a certificate with photos.
- How long it takes
- Usually half a day for a single stairwell.
- Who it's for
- Domestic, commercial and industrial AOV servicing
Battery replacement
New standby batteries for AOV panels showing battery or supply faults.
- When you need it
- The panel shows a battery or supply fault, or batteries failed a load test.
- What's involved
- Old batteries removed, new batteries fitted and charged, system tested on standby power.
- How long it takes
- Usually an hour or two.
- Who it's for
- Domestic, commercial and industrial battery replacement
Actuator and motor replacement
Seized, burnt-out or noisy actuators swapped, keeping sound vents and frames.
- When you need it
- A vent won't open, opens slowly, or the motor is noisy or burnt out.
- What's involved
- Faulty actuator removed, matched replacement fitted, stroke and force set, vent tested.
- How long it takes
- Usually two to four hours per vent.
- Who it's for
- Domestic, commercial and industrial actuator and motor replacement
Control panel upgrades
Obsolete or failing panels replaced with modern controls.
- When you need it
- The panel is obsolete, parts are unavailable or faults keep returning.
- What's involved
- New control panel fitted, existing vents and actuators reconnected, full system commissioning.
- How long it takes
- Usually one day.
- Who it's for
- Domestic, commercial and industrial control panel upgrades
Vents stuck open
Urgent repairs to vents letting in rain and cold, with the system made safe.
- When you need it
- A vent is stuck open, letting in rain, cold or intruders.
- What's involved
- Vent closed and secured, fault traced to actuator, panel or wiring, then repaired.
- How long it takes
- Often fixed on the first visit.
- Who it's for
- Domestic, commercial and industrial vents stuck open
Fire alarm interface repairs
Fixing the link so a fire alarm signal opens the right vent.
- When you need it
- The vent doesn't open when the fire alarm is tested.
- What's involved
- Interface relay and wiring traced, repaired and proven with a live alarm test.
- How long it takes
- Usually two to three hours.
- Who it's for
- Domestic, commercial and industrial fire alarm interface repairs
Smoke shaft and louvre systems
Servicing and repair of mechanical smoke shafts, dampers and louvre vents.
- When you need it
- Mechanical smoke shafts, dampers or louvres need servicing or have faults.
- What's involved
- Fans, dampers, louvres and controls tested and repaired, with a full system report.
- How long it takes
- Half a day to a day.
- Who it's for
- Commercial and industrial smoke shaft and louvre systems
New AOV installations
Roof vents, head-of-stair windows and controls for new or refurbished blocks.
- When you need it
- A new build, refurbishment or fire risk assessment needs smoke ventilation.
- What's involved
- Survey, vent and actuator selection, control panel, detection and fire alarm link, full commissioning.
- How long it takes
- Usually two to five days.
- Who it's for
- Domestic, commercial and industrial new AOV installations
AOV fault finding
Tracing panel faults, wiring faults and vents that will not respond, then repairing the cause so the system works again.
- When you need it
- The control panel shows a fault, or vents do not respond during testing.
- What's involved
- Panel fault log read, circuits, actuators and detectors tested in turn, cause repaired and the full system retested.
- How long it takes
- Often two to four hours, depending on the fault.
- Who it's for
- Domestic, commercial and industrial AOV fault finding
Break-glass and firefighter switches
Replacing cracked or missing break-glass points and firefighter override switches so vents can always be opened by hand.
- When you need it
- A break-glass is damaged or missing, or the firefighter switch does not operate the vents.
- What's involved
- Faulty unit removed, matched replacement fitted and wired, then each vent tested from the new switch.
- How long it takes
- Usually an hour or two per switch.
- Who it's for
- Domestic, commercial and industrial break-glass and firefighter switches