Smoke shafts · UK-wide
Smoke shaft and mechanical smoke extract servicing
Servicing and repair of natural and mechanical smoke shafts, dampers, extract fans and their controls in residential and mixed-use buildings.

In short
A smoke shaft pulls smoke out of the corridor on the fire floor. Dampers on each floor must open only on the fire floor, the shaft head must vent, and in mechanical systems the extract fans must start, reach speed and switch to standby if one fails.
What a smoke shaft service covers
- Floor dampers: open on the fire floor only, close on reset, seals and actuators checked
- Shaft head vent or louvre: opens fully and is clear of debris
- Extract fans (mechanical systems): start, run-up time, direction, duty and standby changeover
- Inverters and motor control: settings, alarms and cooling
- Corridor and lobby vents: replacement air paths open as designed
- Panel and fire alarm interface: correct floor selected from each detector
- Firefighter control and override switches
Why shafts fail
The most common problems are failed damper actuators on a single floor, fans that have not run for months and won't start, inverter faults, and changes to the fire alarm that stop the right floor being selected. Each of these can stay hidden until the system is tested floor by floor.
Reporting
We test every floor and record the result. The report shows exactly which dampers and fans passed, and any defects with photos, so you can plan remedials and keep your building safety records up to date.
Related services
Related guides
Questions we get asked
How long does a smoke shaft test take?
It depends on the number of floors and shafts. A ten-storey block with one shaft is usually a half-day visit.
Can you repair inverter and fan faults?
Yes. We diagnose and repair fan, motor and inverter faults and replace parts where needed.
Need this done?
Tell us the address and what you need, or send a photo. We reply quickly with a clear written quote, covering anywhere in the UK.
From our recent aov & smoke control jobs
Photos from our own jobs. Codes, people and other firms' details are blurred.


Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.