Fire, electrical & security compliance07517 806082
Get a quote

Fire Safety

Fire Doors

Fire door inspections, repairs and certified installs so doors close, seal and hold back fire and smoke as designed.

Fire Doors: fire door with self-closer in a residential corridor
Qualified engineersTrained and equipped for the job
Certificates every timePaperwork you can share with insurers and agents
Clear written quotesKnow the price before we start
Fast responseUrgent faults prioritised

Fire Doors made simple

Fire safety systems only matter on the day they are needed. Regular checks and quick repairs make sure they work first time, every time.

Our fire door inspections check every element: the leaf, frame, gaps, intumescent and smoke seals, hinges, closer, latch, glazing, signage and any damage or alterations. Each door gets a record with photos and a clear pass, repair or replace result.

We work across Lancashire, Greater Manchester and Merseyside, for managing agents, housing providers and HMO landlords.

What's included

  • Door-by-door inspection report
  • Closer, hinge and seal repairs
  • Certified door set installs
  • Gap and intumescent strip correction
Fire alarm control panel mounted in a building corridor

How it works

  1. 1
    Get in touch

    Send us the address and what you need.

  2. 2
    Clear quote

    A simple written price before any work starts.

  3. 3
    Test and fix

    We test everything and fix what we can on the day.

  4. 4
    Certificate

    You get a certificate and a reminder when the next check is due.

Why choose us

  • Systems tested properly, not just looked at
  • Faults fixed on the day where possible
  • Clear certificates after every visit
  • Reminders before the next check is due

When to call us

  • Doors that do not close fully on their own
  • Gaps over 4mm around the door
  • Missing or painted-over seals
  • Damaged leaves or holes from old locks
  • Doors propped open

Questions we get asked

What do you check on a fire door?

Gaps, seals, closers, hinges, glazing, signage and any damage that would reduce fire resistance.

Can a damaged fire door be repaired?

Often yes. If repair would affect certification, we replace it with a certified door set.

What gap is acceptable?

Generally 2 to 4mm on the sides and top, and up to 8mm at the bottom unless smoke seals are fitted there.

How often does it need checking?

Most fire safety systems need regular routine checks and at least one professional service a year. We will tell you exactly what your building needs.

Can you work on a system someone else installed?

Yes. We service and repair most systems, whoever fitted them.

Types of fire doors jobs we do

Every type of fire doors job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.

Fire door inspections

Door-by-door checks with photos and a pass, repair or replace result.

When you need it
Communal doors need quarterly checks or flat doors annual checks.
What's involved
Each door checked for gaps, seals, closers, hinges and damage; photo report.
How long it takes
Around 10–15 minutes per door.
Who it's for
Domestic and commercial fire door inspections

Gap and seal repairs

Correcting gaps and fitting new intumescent and smoke seals.

When you need it
Gaps are too wide or seals are missing or painted over.
What's involved
Doors adjusted and new intumescent and smoke seals fitted.
How long it takes
Usually under an hour per door.
Who it's for
Domestic and commercial gap and seal repairs

Closer replacement

New self-closers so doors shut fully every time.

When you need it
Doors don't close fully on their own.
What's involved
New self-closer fitted and adjusted.
How long it takes
Under an hour per door.
Who it's for
Domestic and commercial closer replacement

Hinge and latch repairs

Replacing worn or missing ironmongery.

When you need it
Hinges are worn or latches don't engage.
What's involved
Fire-rated ironmongery replaced.
How long it takes
Under an hour per door.
Who it's for
Domestic and commercial hinge and latch repairs

Certified door sets

Replacing doors that can't be repaired with certified door sets.

When you need it
Doors are too damaged or altered to repair.
What's involved
Certified door set installed with matching frame and ironmongery.
How long it takes
Usually half a day per door.
Who it's for
Domestic and commercial certified door sets

Flat entrance doors

Annual checks and upgrades of flat front doors.

When you need it
Flat front doors in blocks need annual checks.
What's involved
Door checked, repaired or replaced as needed.
How long it takes
Under an hour per door.
Who it's for
Domestic flat entrance doors

Fire-rated glazing repairs

Replacing cracked or unrated glass in fire doors and vision panels with fire-rated glazing and the correct beads and seals.

When you need it
Glass in a fire door is cracked, missing or not fire-rated.
What's involved
Damaged glazing removed, fire-rated glass fitted with a matching intumescent glazing system and beads, door checked.
How long it takes
Usually one to two hours per panel.
Who it's for
Domestic and commercial fire-rated glazing repairs

Fire door hold-open devices

Devices that hold busy fire doors open safely and let them close automatically when the fire alarm sounds.

When you need it
Fire doors are being wedged open, or busy corridors and care settings need doors held back.
What's involved
Hold-open device or free-swing closer fitted, linked to the fire alarm or sound-activated, and release tested.
How long it takes
Usually one to two hours per door.
Who it's for
Domestic and commercial fire door hold-open devices

Door and frame repairs

Repairing splits, holes, damaged edges and loose frames on fire doors where the door is still worth saving.

When you need it
A door or frame has damage, splits or holes, or the frame is loose in the wall.
What's involved
Damage assessed, timber repaired with suitable materials, frame re-fixed and gaps to the wall sealed.
How long it takes
Usually one to three hours per door.
Who it's for
Domestic and commercial door and frame repairs

Riser and cupboard fire doors

Inspection and repair of fire-rated doors on risers, meter cupboards and plant rooms, which are often overlooked.

When you need it
Service cupboard doors are damaged, left unlocked, or missing seals, locks or signs.
What's involved
Doors checked, seals, locks and signs corrected, or a certified door set fitted where repair is not possible.
How long it takes
Usually under an hour per door for repairs.
Who it's for
Domestic and commercial riser and cupboard fire doors

Fire Doors: install, maintain and repair

Fire Doors installation

Survey, design and a neat, tested installation with full paperwork.

Installation →

Fire Doors maintenance

Planned servicing that keeps it reliable and compliant, with reports after every visit.

Maintenance →

Fire Doors repair

Fault finding and repairs on any make, with urgent faults prioritised.

Repairs →

Domestic, commercial and industrial

Domestic fire doors

For homes and rental properties: tidy work, clear explanations and certificates for landlords and agents.

Domestic fire doors →

Commercial fire doors

For offices, shops, hospitality and managed buildings, planned around your opening hours.

Commercial fire doors →

Industrial fire doors

For factories, warehouses and industrial units, working safely around your operations.

Industrial fire doors →

Same day service

Urgent fire doors fault? Call 07517 806082. Same-day attendance is often possible, and urgent faults are always prioritised.

Same day fire doors →

Fire Doors near me

Searching for fire doors near me? We cover Lancashire, Greater Manchester and Merseyside.

Fire Doors near me →

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.