Fire, electrical & security compliance07517 806082
Get a quote

Repair

Fire Doors repairs

Fast, reliable fire doors repairs, with urgent faults prioritised.

Fire Doors repairs: fire door with self-closer in a residential corridor
Qualified engineersTrained and equipped for the job
Certificates every timePaperwork you can share with insurers and agents
Clear written quotesKnow the price before we start
Fast responseUrgent faults prioritised

Fire Doors repairs

When something stops working, you need it fixed properly and quickly. Our engineers find the cause, not just the symptom, and carry common parts so many repairs are finished on the first visit.

We repair systems whoever installed them. If a part needs ordering, we tell you straight away and give you a clear price before we go ahead.

Urgent faults are prioritised, and same-day attendance is often possible.

Fire door inspections, repairs and certified installs so doors close, seal and hold back fire and smoke as designed.

What's included

  • Door-by-door inspection report
  • Closer, hinge and seal repairs
  • Certified door set installs
  • Gap and intumescent strip correction

How it works

  1. 1
    Call us

    Tell us what is happening.

  2. 2
    Diagnose

    We find the cause of the fault.

  3. 3
    Repair

    Fixed on the spot where possible.

  4. 4
    Test

    Checked and signed off.

Fire alarm control panel mounted in a building corridor

Questions we get asked

Do you repair systems you didn't install?

Yes, we repair most makes and models.

Can you come today?

For urgent faults, same-day attendance is often possible. Call us and we will give you the earliest time.

What do you check on a fire door?

Gaps, seals, closers, hinges, glazing, signage and any damage that would reduce fire resistance.

Can a damaged fire door be repaired?

Often yes. If repair would affect certification, we replace it with a certified door set.

Types of fire doors jobs we do

Every type of fire doors job we carry out, with when you need it, what's involved and how long it takes. Domestic, commercial and industrial.

Fire door inspections

Door-by-door checks with photos and a pass, repair or replace result.

When you need it
Communal doors need quarterly checks or flat doors annual checks.
What's involved
Each door checked for gaps, seals, closers, hinges and damage; photo report.
How long it takes
Around 10–15 minutes per door.
Who it's for
Domestic and commercial fire door inspections

Gap and seal repairs

Correcting gaps and fitting new intumescent and smoke seals.

When you need it
Gaps are too wide or seals are missing or painted over.
What's involved
Doors adjusted and new intumescent and smoke seals fitted.
How long it takes
Usually under an hour per door.
Who it's for
Domestic and commercial gap and seal repairs

Closer replacement

New self-closers so doors shut fully every time.

When you need it
Doors don't close fully on their own.
What's involved
New self-closer fitted and adjusted.
How long it takes
Under an hour per door.
Who it's for
Domestic and commercial closer replacement

Hinge and latch repairs

Replacing worn or missing ironmongery.

When you need it
Hinges are worn or latches don't engage.
What's involved
Fire-rated ironmongery replaced.
How long it takes
Under an hour per door.
Who it's for
Domestic and commercial hinge and latch repairs

Certified door sets

Replacing doors that can't be repaired with certified door sets.

When you need it
Doors are too damaged or altered to repair.
What's involved
Certified door set installed with matching frame and ironmongery.
How long it takes
Usually half a day per door.
Who it's for
Domestic and commercial certified door sets

Flat entrance doors

Annual checks and upgrades of flat front doors.

When you need it
Flat front doors in blocks need annual checks.
What's involved
Door checked, repaired or replaced as needed.
How long it takes
Under an hour per door.
Who it's for
Domestic flat entrance doors

Fire-rated glazing repairs

Replacing cracked or unrated glass in fire doors and vision panels with fire-rated glazing and the correct beads and seals.

When you need it
Glass in a fire door is cracked, missing or not fire-rated.
What's involved
Damaged glazing removed, fire-rated glass fitted with a matching intumescent glazing system and beads, door checked.
How long it takes
Usually one to two hours per panel.
Who it's for
Domestic and commercial fire-rated glazing repairs

Fire door hold-open devices

Devices that hold busy fire doors open safely and let them close automatically when the fire alarm sounds.

When you need it
Fire doors are being wedged open, or busy corridors and care settings need doors held back.
What's involved
Hold-open device or free-swing closer fitted, linked to the fire alarm or sound-activated, and release tested.
How long it takes
Usually one to two hours per door.
Who it's for
Domestic and commercial fire door hold-open devices

Door and frame repairs

Repairing splits, holes, damaged edges and loose frames on fire doors where the door is still worth saving.

When you need it
A door or frame has damage, splits or holes, or the frame is loose in the wall.
What's involved
Damage assessed, timber repaired with suitable materials, frame re-fixed and gaps to the wall sealed.
How long it takes
Usually one to three hours per door.
Who it's for
Domestic and commercial door and frame repairs

Riser and cupboard fire doors

Inspection and repair of fire-rated doors on risers, meter cupboards and plant rooms, which are often overlooked.

When you need it
Service cupboard doors are damaged, left unlocked, or missing seals, locks or signs.
What's involved
Doors checked, seals, locks and signs corrected, or a certified door set fitted where repair is not possible.
How long it takes
Usually under an hour per door for repairs.
Who it's for
Domestic and commercial riser and cupboard fire doors

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.