Fire, electrical & security compliance07517 806082
Get a quote

Fault guide · Barriers

Barrier arm damaged: replacement options

Barrier arms get hit. Here's what to do straight after an impact, and the options for getting the barrier working again.

Automatic barrier at a car park entrance at dusk

Updated 5 November 2026

Quick answer

After an impact, isolate the barrier and keep people away from the damaged arm. A replacement arm must be the right length, weight and type for the barrier, and the springs or balance must be reset afterwards, otherwise the motor and gearbox wear out quickly.

Straight after an impact

  • Isolate the power to the barrier if it's safe to do so
  • Keep people and vehicles away from broken sections
  • Photograph the damage and the vehicle details for insurance
  • Check the barrier housing hasn't been knocked off its base

Replacement options

  • Like-for-like arm cut to length
  • Breakaway or flexible arms that reduce damage from future impacts
  • Articulated or folding arms where headroom is limited
  • Added skirts, lights or reflective strips to make the arm more visible

After replacement

The barrier is rebalanced so the arm stays put when the motor is released, the limits are reset, and the safety devices are checked before the barrier goes back into use.

Questions we get asked

Can the arm be replaced the same day?

For common barriers we can often supply and fit an arm the same or next day.

Why does the arm need rebalancing?

A new arm may weigh differently from the old one. If the springs aren't adjusted, the motor works harder and wears out early.

Need this done?

Tell us the address and what you need, or send a photo. We reply quickly with a clear written quote, covering anywhere in the UK.

Get a free quote Call 07517 806082

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.