Fire, electrical & security compliance07517 806082
Get a quote

Fault guide · Emergency lighting

Emergency light not charging or showing a fault

A red light, no light, or a fitting that fails its test usually means a battery, charger or supply problem.

Emergency exit sign and lighting in a dark corridor

Updated 5 November 2026

Quick answer

On most emergency lights, a green LED means charging and a red or flashing LED means a fault. The usual causes are an old battery, the permanent supply being switched off, or a faulty charger or lamp.

Common causes

  • Battery at the end of its life (often around four years)
  • Unswitched supply to the fitting turned off
  • Fitting damaged or water ingress
  • Charger or LED driver failure
  • Self-test fittings reporting a failed test

What we do

We test the supply, battery and lamp, replace batteries or the fitting, and update the logbook.

Questions we get asked

Can I replace the battery myself?

It's best done by a competent person, as the fitting must be retested.

Should I replace all batteries at once?

If several have failed, replacing all of the same age is often more efficient.

Need this done?

Tell us the address and what you need, or send a photo. We reply quickly with a clear written quote, covering across Lancashire, Greater Manchester and Merseyside.

Get a free quote Call 07517 806082

From our recent jobs

Photos from our own jobs. Codes, people and other firms' details are blurred.

Three-phase distribution board with dedicated fire alarm and emergency lighting circuits
Three-phase distribution board with dedicated, labelled fire alarm and emergency lighting circuits.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.