Guide · Emergency lighting
Emergency lighting testing: monthly and annual checks
What the monthly flick test and annual duration test involve, who can do them, and what to record.

Updated 5 November 2026
Quick answer
BS 5266-1 recommends a short monthly functional test of every emergency light and exit sign, and an annual test for the full rated duration, usually three hours. Results and defects should be recorded in a logbook.
Monthly test
- Simulate a mains failure with a test key switch
- Check every fitting and sign lights up
- Restore power and check the charging indicator
- Record the result and any failed fittings
Annual test
Every fitting runs on battery for its full rated duration, typically three hours. Fittings that fail to last are recorded and replaced. Because the batteries need time to recharge afterwards, the annual test is usually done out of hours or in sections.
Common faults
- Red or no charging LED: battery, charger or supply fault
- Fitting fails the duration test: battery near the end of its life
- Exit sign dim or damaged
- Fittings missing after refurbishment or alterations
Related services
Related guides
Questions we get asked
Who can do the monthly test?
A trained member of staff or managing agent can do it. We provide simple training and logbooks.
How long do emergency light batteries last?
Often around four years, depending on the type and temperature.
Need this done?
Tell us the address and what you need, or send a photo. We reply quickly with a clear written quote, covering across Lancashire, Greater Manchester and Merseyside.
From our recent jobs
Photos from our own jobs. Codes, people and other firms' details are blurred.


Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.