Fault guide · Air conditioning
Air conditioning not cooling or leaking water
Weak cooling, water dripping from the indoor unit or error codes are common, and many are fixed by a service.

Updated 5 November 2026
Quick answer
The usual causes of poor cooling are dirty filters, a blocked outdoor unit or low refrigerant. Water leaks usually mean a blocked condensate drain or pump. A regular service prevents most of these.
Checks
- Clean the indoor unit filters
- Make sure the outdoor unit isn't blocked by leaves or covers
- Check the mode and set temperature
- Note any error codes on the display
Faults we repair
- Blocked condensate drains and failed pumps
- Refrigerant leaks (by F-gas qualified engineers)
- Fan motor and PCB faults
- Sensor and controller faults
Questions we get asked
How often should air con be serviced?
At least once a year, more often in busy offices or kitchens.
Can you service units someone else installed?
Yes.
Need this done?
Tell us the address and what you need, or send a photo. We reply quickly with a clear written quote, covering across Lancashire, Greater Manchester and Merseyside.
Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.