Fault guide · Electrical
RCD keeps tripping: causes and safe checks
An RCD that keeps tripping is doing its job: detecting a fault. Here's how to narrow down the cause safely.

Updated 5 November 2026
Quick answer
Most RCD trips are caused by a faulty appliance, moisture in an outdoor socket or light, or damaged wiring. Unplug everything on the affected circuits, reset the RCD and plug items back in one at a time to find the culprit.
Safe checks
- Unplug all appliances on the circuits the RCD protects
- Reset the RCD. If it holds, plug appliances back in one by one
- If it trips with nothing plugged in, switch off the circuit breakers and turn them back on one at a time
- Note whether it happens in wet weather
Common causes
- Faulty kettles, washing machines, immersion heaters and outdoor equipment
- Water in outdoor lights or sockets
- Damaged cables from drilling or nails
- Old wiring breaking down
- Too many appliances with small leakage currents on one RCD
Questions we get asked
Is it safe to keep resetting the RCD?
No. Repeated tripping means a fault, so stop and call an electrician.
Can you come the same day?
We aim for same-day attendance for loss of power.
Need this done?
Tell us the address and what you need, or send a photo. We reply quickly with a clear written quote, covering across Lancashire, Greater Manchester and Merseyside.
From our recent jobs
Photos from our own jobs. Codes, people and other firms' details are blurred.



Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.