Fire, electrical & security compliance07517 806082
Get a quote

Security & access

Access control and door entry explained

Fobs, intercoms, maglocks — and why every locked exit must release in a fire.

Who's responsibleThe building owner, landlord or managing agent
Most frequent checkYearly
Parts explained9 components

In plain English

Access control decides who can open which door, using fobs, cards, codes, phones or fingerprints. Door entry and intercoms let visitors call a flat or reception, talk (or see) them, and be let in remotely.

Why it matters: It keeps buildings secure — but a locked door on an escape route must always let people out in an emergency.

What the law says

  • Regulatory Reform (Fire Safety) Order 2005

    Doors on escape routes must be easy to open from the inside without a key. Electric locks must release on fire alarm and power failure.

  • Equality Act 2010

    Systems should be usable by disabled people, for example with suitable heights, audio and visual feedback.

  • UK GDPR

    Fob logs and video entry recordings are personal data.

Standards we work to

  • BS EN 60839-11-1 — Electronic access control systems.
  • BS 7273-4 — How fire alarms should release locked doors.

Who is responsible?

The building owner, landlord or managing agent.

The components we install

These are the parts that make up a typical access control and door entry installation, what each one does, and what a healthy one looks like.

  • Reader

    Reads a fob, card, phone or fingerprint.

    What to look for: Lights and beeps when presented.

  • Controller

    Holds the list of who can go where and when.

    What to look for: Backed up and secure.

  • Magnetic lock (maglock)

    A strong electromagnet that holds the door shut. Releases when power is cut — so it's 'fail-safe'.

    What to look for: Door releases on fire alarm.

  • Electric strike

    Replaces the latch plate in the frame and releases electrically.

    What to look for: Latch lines up.

  • Exit button

    Press to exit (request-to-exit).

    What to look for: Clearly labelled.

  • Green emergency door release

    Green break-glass unit that cuts power to the lock in an emergency.

    What to look for: Next to the door, unobstructed.

  • Door entry panel

    The outside panel with buttons or a keypad, often with a camera.

    What to look for: Speech clear, lights work.

  • Handset / video monitor

    Inside each flat or reception to answer and release the door.

    What to look for: Release button works.

  • Power supply with battery

    Keeps the system running — but locks should still release safely.

    What to look for: No alarm or fault light.

How often it must be checked

  • YearlyService: locks, readers, power supplies, batteries and fire release tested.By: Security engineer
  • WeeklyWith the fire alarm test, check electrically locked doors release.By: Site staff

See the testing schedule for every system →

Paperwork you should get

  • Handover pack — Device list, user database and admin details.
  • Service record — Each visit.

Certificates explained →

Simple checks you can do

  • Delete lost fobs straight away.
  • Check doors release when the fire alarm is tested.
  • Keep a list of who holds admin access.

Common questions

Can I use the old intercom wiring for a video system?

Often yes. Many modern systems run over 2-wire cabling. We check on survey.

Need this installed, tested or certified?

We install, service and certify this equipment and hand you every certificate in plain English.

Related guides

This guide is a plain-English summary to help you understand your duties. It is not legal advice, and rules can change. Your fire risk assessment, insurer or local council may ask for more.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.