Testing schedule
How often does everything need testing?
One page with every check, test and service interval for the systems we install — who does it and how often.
Tip: put every date in one calendar. Missed tests are the most common thing fire officers, councils and insurers pick up on.
Fire alarm systems
- WeeklySet off one manual call point and check the sounders work. Use a different call point each week and write it in the log book.By: You or your staff
- Every 6 months (max)Full inspection and service: detectors tested, batteries checked, panel and faults checked, certificate issued.By: Competent fire alarm engineer
- YearlyOver each 12 months, every detector and call point should have been tested at least once (often split across the two services).By: Competent fire alarm engineer
Emergency lighting
- MonthlyA short 'flick test': cut the power to the lights briefly and check every emergency fitting comes on.By: You, your staff or us
- YearlyFull duration test: run the lights on battery for their full rated time (usually 3 hours) and check none dim or fail.By: Competent electrician
AOVs and smoke ventilation
- Weekly or monthlyOperate the system (often via the fire alarm test) and check vents open and close.By: Site staff or us
- Monthly (18m+ buildings)Recorded check of smoke control as essential firefighting equipment.By: Responsible person
- At least yearlyFull service: actuators, control panel, batteries, detectors, switches and vent operation tested and certified.By: Competent AOV engineer
Smoke, heat and CO alarms in homes
- Start of every tenancyLandlord checks each alarm works on day one.By: Landlord or agent
- MonthlyPress the test button on each alarm.By: Occupier
- Every 10 yearsReplace smoke and heat alarms (date is on the side). CO alarms usually last 5–10 years — check the label.By: Landlord / homeowner
Fire doors
- Every 3 monthsCheck communal fire doors in blocks over 11 m.By: Responsible person or inspector
- Every 12 monthsCheck flat entrance doors in blocks over 11 m; full survey recommended in most other buildings.By: Competent fire door inspector
- Every 6 months (busy doors)Heavy-use doors in schools, hospitals and offices need more frequent checks.By: Competent fire door inspector
Fire extinguishers and blankets
- MonthlyQuick look: in place, pin and seal intact, gauge in the green, not damaged.By: You or your staff
- YearlyBasic service and service label updated.By: Competent extinguisher engineer
- Every 5 yearsExtended service (discharge test and refill) for water, foam and powder.By: Competent engineer
- Every 10 yearsCO2 extinguishers overhauled or replaced.By: Competent engineer
Sprinkler systems
- Weekly (commercial)Check pressures, water levels, valves, and run pumps.By: Site staff
- Yearly (minimum)Full service and inspection.By: Competent sprinkler engineer
Dry risers and wet risers
- Every 6 monthsVisual inspection of inlets, outlets, valves and cabinets.By: Competent engineer
- YearlyWet test: the riser is filled and pressure tested (typically 12 bar for 15 minutes).By: Competent engineer
Kitchen fire suppression
- Every 6 monthsService: detection, nozzles, agent, release and gas shut-off tested.By: Competent suppression engineer
Fire stopping and compartmentation
- After any workCheck that new holes have been sealed with the right product.By: Contractor / site manager
- Yearly (typical)Compartmentation survey in blocks and HMOs, as the fire risk assessment requires.By: Competent surveyor
Evacuation alert systems
- Regularly (typically every 6 months)Service and test of the control equipment and alert devices in flats.By: Competent engineer
Electrical installations and EICRs
- Every 5 years (max)EICR for privately rented homes and most commercial premises.By: Qualified electrician
- Every 10 yearsRecommended EICR for owner-occupied homes, or when buying a property.By: Qualified electrician
- More oftenSome premises like swimming pools, caravan parks or industrial sites need shorter intervals.By: Qualified electrician
- Every 3 monthsPress the 'T' test button on each RCD.By: You
EV chargers
- YearlyVisual check and functional test (recommended).By: Qualified electrician
- With your EICRIncluded in the periodic inspection.By: Qualified electrician
Air conditioning
- YearlyService: filters, coils, drains, refrigerant and electrics checked.By: F-gas certified engineer
- Yearly or moreLeak check if the system is 5 tonnes CO2 equivalent or more.By: F-gas certified engineer
- Every 5 yearsTM44 inspection for systems over 12 kW.By: Accredited energy assessor
Automatic barriers and gates
- Every 6 months (recommended)Service, safety device checks and force test with a calibrated meter.By: Competent gate/barrier engineer
- Daily/weeklyQuick look: safety beams working, no damage.By: Site staff
CCTV
- MonthlyCheck every camera has a picture and the recorder is recording with the right time.By: You
- YearlyService: clean cameras, check hard drive health, firmware, cabling.By: Security engineer
Access control and door entry
- YearlyService: locks, readers, power supplies, batteries and fire release tested.By: Security engineer
- WeeklyWith the fire alarm test, check electrically locked doors release.By: Site staff
Intruder alarms
- Once or twice a yearService: detectors, batteries, sounders and signalling. Twice yearly is required for some non-monitored systems.By: Approved installer
- MonthlyWalk test and check the panel log.By: You
Nurse call and warden call
- Daily/weeklyTest sample call points and check the panel log.By: Care staff
- YearlyFull service of all call points, cords, displays, pagers and batteries.By: Nurse call engineer
Data cabling, Wi-Fi and fibre
- On installEvery cable certified with a tester, and results handed over.By: Network installer
- As neededFault finding and re-testing after changes.By: Network installer
Gas appliances and safety checks
- Every 12 monthsLandlord gas safety check of all appliances and flues.By: Gas Safe registered engineer
- Every 12 monthsBoiler service (recommended for everyone).By: Gas Safe registered engineer
Need this installed, tested or certified?
We install, service and certify this equipment and hand you every certificate in plain English.
This guide is a plain-English summary to help you understand your duties. It is not legal advice, and rules can change. Your fire risk assessment, insurer or local council may ask for more.
Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.