Security & access
Intruder alarms explained
Grades, police response and the detectors that make up a burglar alarm.
In plain English
An intruder alarm uses detectors on doors, windows and rooms to sense break-ins. It sounds a bell box, and can alert your phone, keyholders or a monitoring centre.
What the law says
NPCC Security Systems Policy
For police response, the alarm must be installed and maintained to the right standards by an NSI or SSAIB approved installer, monitored, and issued a police URN (Unique Reference Number).
Environmental Protection / noise rules
Alarms that ring on and on can be a statutory nuisance. External sounders cut off after a set time.
Standards we work to
- BS EN 50131 / PD 6662 — Intruder alarm standards with security grades 1 to 4.
- BS 8243 — Rules for 'confirmed' alarms needed for police response.
Who is responsible?
The property owner or business.
The components we install
These are the parts that make up a typical intruder alarms installation, what each one does, and what a healthy one looks like.
Control panel
Processes signals from detectors and decides when to alarm.
What to look for: No tamper or fault warnings.
Keypad / fob reader
Sets and unsets the alarm.
What to look for: Codes not shared widely.
PIR motion detector
Senses body heat moving across a room.
What to look for: Not blocked by furniture.
Dual-tech detector
PIR plus microwave — fewer false alarms in tricky areas.
What to look for: As above.
Door and window contacts
Magnetic contacts that trigger when opened.
What to look for: Aligned, fixed tight.
External sounder (bell box)
Loud siren and strobe on the outside wall.
What to look for: Battery healthy, lid secure.
Communicator / signalling device
Sends alerts to your phone or a monitoring centre, often over two paths (e.g. IP and 4G).
What to look for: Test signals received.
How often it must be checked
- Once or twice a yearService: detectors, batteries, sounders and signalling. Twice yearly is required for some non-monitored systems.By: Approved installer
- MonthlyWalk test and check the panel log.By: You
Paperwork you should get
- Certificate of compliance — Confirms grade and standards.
- Service record — Each maintenance visit.
- Police URN letter — Where police response applies.
Simple checks you can do
- Keep detectors clear.
- Keep your keyholder list up to date.
- Don't ignore 'fault' or 'tamper' messages.
Common questions
Do I need a monitored alarm?
For police response or most commercial insurance, yes. For many homes, a self-monitored app system is enough.
Need this installed, tested or certified?
We install, service and certify this equipment and hand you every certificate in plain English.
Related guides
This guide is a plain-English summary to help you understand your duties. It is not legal advice, and rules can change. Your fire risk assessment, insurer or local council may ask for more.
Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.