Fire, electrical & security compliance07517 806082
Get a quote

Security & access

Automatic barriers and gates explained

Why powered gates and barriers are classed as machinery, and the safety parts that stop them hurting anyone.

Who's responsibleThe installer at handover; the owner or site manager after that
Most frequent checkEvery 6 months (recommended)
Parts explained9 components

In plain English

Automatic barriers and gates are motorised arms or gates controlled by fobs, keypads, number-plate cameras or intercoms. Because they move with force on their own, the law treats them as machinery.

Why it matters: Badly installed or unmaintained gates have caused serious injuries and deaths. Safety devices and regular force testing prevent this.

What the law says

  • Supply of Machinery (Safety) Regulations 2008

    Whoever installs or puts a powered gate or barrier into service counts as its 'manufacturer'. They must do a risk assessment, build a technical file, issue a Declaration of Conformity and fit a UKCA/CE mark.

  • Health and Safety at Work etc. Act 1974 & Workplace Regulations 1992

    Gates used at work must be safe, with safety features that work and are maintained.

  • Occupiers' Liability Acts

    Owners owe a duty of care to everyone using the gate, including visitors.

Standards we work to

  • BS EN 12453 — Safety requirements for powered gates and doors, including force limits.
  • BS EN 13241 — Product standard for industrial and commercial gates and barriers.
  • DHF TS 011 — Industry code of practice for powered gates in the UK.

Who is responsible?

The installer at handover; the owner or site manager after that.

The components we install

These are the parts that make up a typical automatic barriers and gates installation, what each one does, and what a healthy one looks like.

  • Barrier cabinet and motor

    Houses the motor, gearbox and springs that lift the arm.

    What to look for: Door locked, no oil leaks.

  • Boom arm

    The aluminium arm, often with reflective strips or lights.

    What to look for: Straight, no cracks.

  • Control board

    Decides when to open, close and stop.

    What to look for: No fault lights.

  • Photocells (safety beams)

    Invisible beams that stop the barrier closing on a car or person.

    What to look for: Aligned, lenses clean.

  • Safety edges

    Rubber strips that stop and reverse a gate if it touches something.

    What to look for: Not split or loose.

  • Induction loops

    Wires in the road that sense a vehicle — to open automatically or stop the arm coming down on a car.

    What to look for: Road surface not cracked over the cut.

  • Access control

    Fob readers, keypads, ANPR cameras or intercoms to let people in.

    What to look for: Working and weatherproof.

  • Traffic lights

    Show drivers when to go.

    What to look for: Both colours working.

  • Manual release

    Lets you open the barrier or gate in a power cut.

    What to look for: Key kept somewhere known.

How often it must be checked

  • Every 6 months (recommended)Service, safety device checks and force test with a calibrated meter.By: Competent gate/barrier engineer
  • Daily/weeklyQuick look: safety beams working, no damage.By: Site staff

See the testing schedule for every system →

Paperwork you should get

  • Declaration of Conformity — Confirms the gate meets the Machinery Regulations.
  • Risk assessment & technical file — How the risks were assessed and controlled.
  • Force test results — Measured closing forces.
  • Maintenance log — Service visits and repairs.

Certificates explained →

Simple checks you can do

  • Watch the barrier stop and reverse when the beams are broken.
  • Keep loops and beams clear.
  • Don't let anyone walk through a barrier lane meant for vehicles.
  • Stop using it and call us if it moves erratically.

Common questions

Our barrier has no paperwork. Is that a problem?

It may not meet the Machinery Regulations. We can survey it, risk assess it, upgrade safety devices and issue the paperwork.

Do you cover my area?

Yes — barrier and gate work is covered UK-wide.

Need this installed, tested or certified?

We install, service and certify this equipment and hand you every certificate in plain English.

Related guides

This guide is a plain-English summary to help you understand your duties. It is not legal advice, and rules can change. Your fire risk assessment, insurer or local council may ask for more.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.