Fire safety
Fire extinguishers and blankets explained
Which extinguisher for which fire, and how often they need servicing.
In plain English
Portable extinguishers let trained people tackle a small fire in its first moments. Each type is for certain kinds of fire, shown by a coloured band on the red body.
What the law says
Regulatory Reform (Fire Safety) Order 2005
Workplaces and common parts must have suitable firefighting equipment where needed, kept maintained, with staff trained to use it.
Standards we work to
- BS 5306-8 — Which extinguishers to choose and where to put them.
- BS 5306-3 — How often and how they must be serviced.
- BS EN 3 — Product standard for portable extinguishers.
Who is responsible?
The responsible person for the premises.
The components we install
These are the parts that make up a typical fire extinguishers and blankets installation, what each one does, and what a healthy one looks like.
Water (red band)
For paper, wood, fabric (Class A). Never on electrics or oil.
What to look for: Gauge in green.
Foam (cream band)
For Class A and flammable liquids like petrol (Class B).
What to look for: Gauge in green.
CO2 (black band)
For electrical fires. Leaves no residue. Horn gets very cold.
What to look for: Horn intact, seal on.
Dry powder (blue band)
Multi-purpose, but makes a mess and hard to see in. Not usually for small indoor rooms.
What to look for: Not caked — gauge in green.
Wet chemical (yellow band)
For deep fat and cooking oil fires (Class F).
What to look for: Kept near the fryer.
Fire blanket
Smothers small pan fires or wraps clothing on fire.
What to look for: Pull tabs hanging down, easy to reach.
Safety pin and tamper seal
Stops accidental discharge. A broken seal means it may have been used.
What to look for: Pin in, seal unbroken.
ID sign and bracket
Wall sign showing type and use; bracket keeps it off the floor.
What to look for: Sign matches the extinguisher.
How often it must be checked
- MonthlyQuick look: in place, pin and seal intact, gauge in the green, not damaged.By: You or your staff
- YearlyBasic service and service label updated.By: Competent extinguisher engineer
- Every 5 yearsExtended service (discharge test and refill) for water, foam and powder.By: Competent engineer
- Every 10 yearsCO2 extinguishers overhauled or replaced.By: Competent engineer
Paperwork you should get
- Service certificate — Lists each extinguisher, location and condition.
- Service label — On each extinguisher showing the last service date.
Simple checks you can do
- Monthly visual check.
- Keep them on brackets or stands near exits.
- If one is used even a little, have it refilled.
- Make sure staff know which one to use.
Common questions
Do landlords need extinguishers in flats?
Not usually in each flat. In common parts it depends on the fire risk assessment — many blocks follow a 'get out, stay out' policy with no extinguishers in corridors.
Need this installed, tested or certified?
We install, service and certify this equipment and hand you every certificate in plain English.
Related guides
This guide is a plain-English summary to help you understand your duties. It is not legal advice, and rules can change. Your fire risk assessment, insurer or local council may ask for more.
Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.