Fire, electrical & security compliance07517 806082
Get a quote

Fire safety

Evacuation alert systems explained

The fire service-only system that tells flats to evacuate in a 'stay put' block.

Who's responsibleThe building owner or responsible person
Most frequent checkRegularly (typically every 6 months)
Parts explained5 components

In plain English

Most blocks of flats use a 'stay put' strategy: if the fire isn't in your flat, you stay inside. An evacuation alert system lets firefighters switch to a full evacuation and sound alarms in chosen flats or the whole building. Only the fire service can use it.

Why it matters: If a fire spreads beyond where it started, firefighters need a reliable way to tell everyone to leave, floor by floor.

What the law says

  • Building Regulations — Approved Document B

    New blocks of flats in England with a floor at 18 metres or more now need an evacuation alert system.

Standards we work to

  • BS 8629 — The standard for designing, installing and maintaining evacuation alert systems.

Who is responsible?

The building owner or responsible person.

The components we install

These are the parts that make up a typical evacuation alert systems installation, what each one does, and what a healthy one looks like.

  • Evacuation alert control panel (EACIE)

    Locked cabinet near the firefighting entrance with switches for each zone or floor. Needs a special fire service key.

    What to look for: Cabinet locked, no faults.

  • Sounders in each flat

    Make a distinct sound, different from the normal fire alarm.

    What to look for: Not removed or covered by residents.

  • Visual alarm devices

    Flashing lights for residents who are deaf or hard of hearing.

    What to look for: Working.

  • Wiring or radio links

    Connect the panel to every flat.

    What to look for: No faults on the panel.

  • Standby battery

    Keeps the system running in a power cut.

    What to look for: Dated label.

How often it must be checked

  • Regularly (typically every 6 months)Service and test of the control equipment and alert devices in flats.By: Competent engineer

See the testing schedule for every system →

Paperwork you should get

  • Commissioning certificate — On installation.
  • Service certificate — After each service.

Certificates explained →

Simple checks you can do

  • Make sure residents know what the evacuation sound means.
  • Report any tampering with sounders inside flats.

Common questions

Can the managing agent set it off?

No. It's for firefighters only. That's why the panel needs a special key.

Need this installed, tested or certified?

We install, service and certify this equipment and hand you every certificate in plain English.

Related guides

This guide is a plain-English summary to help you understand your duties. It is not legal advice, and rules can change. Your fire risk assessment, insurer or local council may ask for more.

Need a certificate, a repair or a quote?

Tell us the address and what you need. We reply the same working day.