Fire safety
Kitchen fire suppression explained
Automatic systems that knock down fires on fryers, ranges and in extract canopies.
In plain English
A kitchen suppression system sits in the canopy above cooking equipment. When it detects fire it sprays a wet chemical onto the appliances and into the duct, and shuts off the gas or electric supply to the cooking line.
What the law says
Regulatory Reform (Fire Safety) Order 2005
Fire risks in commercial kitchens must be controlled; suppression is often the control your risk assessment or insurer calls for.
Standards we work to
- BS EN 17446 — European standard for kitchen fire suppression systems.
- LPS 1223 — Loss Prevention Standard many insurers ask for.
- TR19 Grease — Guide for cleaning greasy extract ductwork — clean ducts are part of the same protection.
Who is responsible?
The business operating the kitchen (and the landlord if they control the extract).
The components we install
These are the parts that make up a typical kitchen fire suppression installation, what each one does, and what a healthy one looks like.
Nozzles
Aimed at each appliance, the canopy and the duct.
What to look for: Caps in place, not greased over.
Wet chemical cylinder
Holds the agent, which cools the oil and forms a soapy crust.
What to look for: Gauge in green.
Detection line
Fusible links or a heat-sensitive tube that triggers the system.
What to look for: Not damaged or painted.
Manual pull station
Lets staff release the system by hand.
What to look for: Near the exit route, clear.
Gas shut-off valve
Cuts the gas to the cooking line when the system fires.
What to look for: Must be reset by a competent person.
How often it must be checked
- Every 6 monthsService: detection, nozzles, agent, release and gas shut-off tested.By: Competent suppression engineer
Paperwork you should get
- Service certificate — Required by most insurers.
Simple checks you can do
- Keep nozzles clean and pointed correctly.
- Don't move appliances out from under their nozzles.
- Make sure staff know where the pull station is.
Common questions
We moved the fryer. Is that a problem?
Yes — nozzles are aimed at specific appliances. Tell us and we'll re-align them.
Need this installed, tested or certified?
We install, service and certify this equipment and hand you every certificate in plain English.
Related guides
This guide is a plain-English summary to help you understand your duties. It is not legal advice, and rules can change. Your fire risk assessment, insurer or local council may ask for more.
Manufacturers we work with
We install, service and repair equipment from all of these manufacturers. The most relevant for this page are shown first.
Need a certificate, a repair or a quote?
Tell us the address and what you need. We reply the same working day.